Specifications - Laserfiche WebLink

Home Browse Search

Contractor shall provide the quality of materials as generally specified throughout the Contract Documents. 3.4.4 Contractor shall not be entitled to an adjustment in the Contract time or an adjustment in the Contract Sum if a change or Work is required due to an error, inconsistency, omission or violation that the Contractor failed to timely report. 3.4.5 Contractor shall be responsible for inspection of portions of Work already performed under Contract to determine that such portions are in proper condition to receive subsequent Work. 3.5 Cleaning and Removal 3.5.1 The Contractor shall keep the Work site and surrounding areas free from accumulation of waste materials, rubbish, debris, and dirt resulting from the Work and shall clean the Work site and surrounding areas as requested by the AlE and the City's Representative, including mowing of grass greater than 6 inches high. The Contractor shall be responsible for the cost of clean up and removal of debris from premises. The building and premises shall be kept clean, safe, in a workmanlike manner, and in compliance with OSHA standards at all times. At completion of the Work, the Contractor shall remove from and about the Work site tools, construction equipment, machinery, fencing, and surplus materials. Further, at the completion of the work, all dirt, stains, and smudges shall be removed from every part of the building, all glass in doors and windows shall be washed, and entire Work shall be left broom clean in a finished state ready for occupancy. The Contractor shall advise his Subcontractors of any tier of this provision, and the Contractor shall be fully responsible for leaving the premises in a finished state ready for use to the satisfaction of the City's Representative. If the Contractor fails to comply with the provisions of this paragraph, the City may do so and the cost thereof shall be charged to the Contractor. 3.6 Materials, Labor, and Workmanship 3.6.1 Materials and equipment incorporated into the Work shall strictly conform to the Contract Documents and representations and approved Samples provided by Contractor and shall be of the most suitable grade of their respective kinds for their respective uses, and shall be fit and sufficient for the purpose intended, merchantable, of good new material and workmanship, and free from defect. Workmanship shall be in accordance with the highest standard in the industry and free from defect in strict accordance with the Contract Documents. 3.6.2 Materials and fixtures shall be new and of latest design unless otherwise specified, and shall provide the most efficient operating and maintenance costs to the City. All Work shall be performed by competent workers and shall be of best quality. 3.6.3 The Contractor shall carefully examine the Contract Documents and shall be responsible for the proper fitting of his material, equipment, and apparatus into the building. 3.6.4 The Contractor shall base his bid only on the Contract Documents. 3.6.5 Materials and workmanship shall be subject to inspection, examination, and test by the AlE and the City's Representative at any and all times during manufacture, installation, and construction of any of them, at places where such manufacture, installation, or construction is performed. 15