Laserfiche WebLink
� Antx M <br />Physical Characteristics <br />Electrical <br />Sleep Mode: 12VDC @ 20mA <br />Monitoring Mode: 12VDC @ 120mA <br />GPRS Transmit mode: 12VDC @ 800ma peak <br />Temperature <br />Industrial temperature range: -40 to +70C <br />NEMA 4X enclosure <br />5.5 "H x 5 "W x 1.3 "D, with mounting holes <br />Messenger Board Specifications <br />• 3.25" x 3.95" <br />— GSM /GPS board piggy -backs on top of <br />Messenger board <br />— 4 mounting holes <br />• CAN controller <br />— Supports protocol version 2.0 part A <br />and B /Active <br />— Bit rates up to 1.25M bit /second <br />— 32 independent PGN message objects <br />• Port 1— RS232 or RS485 — Modbus RTU Slave <br />• Port 2 — RS232 or RS485 — Modbus RTU <br />Master or Special <br />• Battery Backed up Real -Time Clock, event log, <br />data log, and more —10 -year life <br />• GSM -GPRS with SIM card holder embedded <br />on Messenger <br />• Certified with FCC, PTCRB and ATT for <br />GSM /GPRS end -user applications <br />• Extreme low power mode when engine is not <br />running or other user - specified mechanists <br />• 32 -bit processor <br />• FLASH memory for application — download - <br />able via serial port or via GSM connection <br />— 512K <br />• Low -low power SRAM <br />— 512K <br />— battery backed up <br />• DIP switches to select: <br />— Serial port function <br />• Modbus Slave, Debug, None <br />— Serial port interface <br />• RS232 or RS485 per port <br />— Modbus Slave ID <br />• 126 -133 <br />— Port 2 baud rate <br />• 4800 -38400 <br />• Event logger accessible via serial port or via <br />GSM connection <br />• 8 LEDs on -board indicate: <br />— GSM status <br />— GPS status <br />— CAN status <br />— Serial port status <br />— Power <br />— 2 available for user - specified conditions <br />• General purpose inputs <br />— 1 digital/1 analog on 12 -pin Deutsch connector <br />— 3 digital /lanalog on 16 -pin pluggable connector <br />— Digital inputs are contact closures to ground <br />— Analog input is 10 -bit, 0 -3VDC or 0 -20ma <br />or resistive input for fuel sender <br />• Receive SMS messages for reconfiguration or <br />on- demand reporting <br />Amex <br />Some Conditions Monitored <br />Electronic Controller: <br />• GPS Coordinates (location) <br />• 1— General purpose on /off input <br />• 1— Analog input <br />• Standard values read via CANbus <br />— Engine hours <br />— RPM <br />— Battery Voltage <br />— Oil Pressure <br />— Fuel Level <br />— Oil Level <br />— Oil Temperature <br />— Coolant Level <br />— Coolant Temperature <br />— All fault conditions reported by PGN 65226 <br />(DM1 - Diagnostic Message) <br />— All fault conditions reported by PGN 60416 <br />(TPCM used to report multiple diagnostic <br />messages in a single CAN message ) <br />• Optional values read via CANbus <br />— Up to 8 User - specified PGN /FMI <br />analog values <br />— Up to 32 User - specified PGN /FMI <br />on /off values <br />Antx, Inc I P.O. Box 200816 1 Austin,Texas 78720 512- 255 -2800 1 Fax: 512- 255 -8306 <br />sales@antx.com I www.antx.com <br />Deutsch 12 Pin Connector <br />Pluggable 3.81mm Connector <br />Pin-- <br />Function <br />Pin= <br />Function <br />1 <br />9 -30VDC <br />1 <br />User input 3 (contact closure to ground) <br />2 <br />CAN High ( +) <br />2 <br />User input 4 (contact closure to ground) <br />3 <br />Ground <br />3 <br />Analog input <br />4 <br />Port 1 RS485- or RS232 RV (switch selectable) <br />4 <br />External NVAKE or RESET or digital input (selectable) <br />5 <br />Port 2 RS485 - or RS232 RV (switch selectable) <br />5 <br />G <br />Ground <br />Port 2 RS485+ or RS232 TX (switch selectable) <br />6 <br />External WAKE or RESET or digital input (selectable) <br />7 <br />Port 2 RS485 - or RS232 RV (switch selectable) <br />7 <br />Analog input <br />8 <br />Ground <br />8 <br />Port 2 RS485+ or RS232TX (switch selectable) <br />9 <br />Port 1 RS485+ or RS232 TX (switch selectable) <br />9 <br />Port 1 RS485+ or RS232TX (switch selectable) <br />10 <br />Port 1 RS485- or RS232 RV (switch selectable) <br />10 <br />Ground <br />11 <br />Ground <br />11 <br />CAN Low ( -) <br />12 <br />CAN High ( +) <br />12 <br />Ground <br />13 <br />CAN Low ( -) <br />14 <br />Ground <br />Antenna Function <br />15 <br />16 <br />9 -30VDC <br />Ground <br />SMA <br />GPS antenna connection (1575 MHz) <br />SMA-RP GSM /GPRS antenna connection (1900MHz — reverse polarity) <br />Antenna Function <br />SMA <br />GPS antenna connection (1575 MHz) <br />SMA-RP <br />GSM /GPRS antenna connection <br />(1900MHz — reverse polarity) <br />Physical Characteristics <br />Electrical <br />Sleep Mode: 12VDC @ 20mA <br />Monitoring Mode: 12VDC @ 120mA <br />GPRS Transmit mode: 12VDC @ 800ma peak <br />Temperature <br />Industrial temperature range: -40 to +70C <br />NEMA 4X enclosure <br />5.5 "H x 5 "W x 1.3 "D, with mounting holes <br />Messenger Board Specifications <br />• 3.25" x 3.95" <br />— GSM /GPS board piggy -backs on top of <br />Messenger board <br />— 4 mounting holes <br />• CAN controller <br />— Supports protocol version 2.0 part A <br />and B /Active <br />— Bit rates up to 1.25M bit /second <br />— 32 independent PGN message objects <br />• Port 1— RS232 or RS485 — Modbus RTU Slave <br />• Port 2 — RS232 or RS485 — Modbus RTU <br />Master or Special <br />• Battery Backed up Real -Time Clock, event log, <br />data log, and more —10 -year life <br />• GSM -GPRS with SIM card holder embedded <br />on Messenger <br />• Certified with FCC, PTCRB and ATT for <br />GSM /GPRS end -user applications <br />• Extreme low power mode when engine is not <br />running or other user - specified mechanists <br />• 32 -bit processor <br />• FLASH memory for application — download - <br />able via serial port or via GSM connection <br />— 512K <br />• Low -low power SRAM <br />— 512K <br />— battery backed up <br />• DIP switches to select: <br />— Serial port function <br />• Modbus Slave, Debug, None <br />— Serial port interface <br />• RS232 or RS485 per port <br />— Modbus Slave ID <br />• 126 -133 <br />— Port 2 baud rate <br />• 4800 -38400 <br />• Event logger accessible via serial port or via <br />GSM connection <br />• 8 LEDs on -board indicate: <br />— GSM status <br />— GPS status <br />— CAN status <br />— Serial port status <br />— Power <br />— 2 available for user - specified conditions <br />• General purpose inputs <br />— 1 digital/1 analog on 12 -pin Deutsch connector <br />— 3 digital /lanalog on 16 -pin pluggable connector <br />— Digital inputs are contact closures to ground <br />— Analog input is 10 -bit, 0 -3VDC or 0 -20ma <br />or resistive input for fuel sender <br />• Receive SMS messages for reconfiguration or <br />on- demand reporting <br />Amex <br />Some Conditions Monitored <br />Electronic Controller: <br />• GPS Coordinates (location) <br />• 1— General purpose on /off input <br />• 1— Analog input <br />• Standard values read via CANbus <br />— Engine hours <br />— RPM <br />— Battery Voltage <br />— Oil Pressure <br />— Fuel Level <br />— Oil Level <br />— Oil Temperature <br />— Coolant Level <br />— Coolant Temperature <br />— All fault conditions reported by PGN 65226 <br />(DM1 - Diagnostic Message) <br />— All fault conditions reported by PGN 60416 <br />(TPCM used to report multiple diagnostic <br />messages in a single CAN message ) <br />• Optional values read via CANbus <br />— Up to 8 User - specified PGN /FMI <br />analog values <br />— Up to 32 User - specified PGN /FMI <br />on /off values <br />Antx, Inc I P.O. Box 200816 1 Austin,Texas 78720 512- 255 -2800 1 Fax: 512- 255 -8306 <br />sales@antx.com I www.antx.com <br />