Reso 2012-1962 - Laserfiche WebLink

Home Browse Search

BID OFY 2006- 2006-002 CITY OF HALt.ANDALE BEACH PAGE 11 OF35 Fi •Ix— _ SPECIFICATION8 THIS 18 NOT AN ORDER Flying Cross Item: 3SW7886Z MS'S SHIRT SPECIFICATIONS – LONG a&= Fabric: Content: 100% Textured Polyester confomring to the following ei : 7.5 oz./ Linear. yd. Conn aon: 67 warp X 49 filling yams per sq. inch I01K Warp 6.6 lbs. Filling 8.5 lbs. SMKKMO Tensile: Warp 159 lbs. Filling 155 lbs. Color: LAPD Blue matching standard sample on display. Milliken style 707430, Color 7568. Style: Plain front coat style, form fitting, collar attached, kmg sleeves with barrel cuffs. Two pleated breast pockets. Shoulder sups. Full badge reinforcement. Mat&Mg Inside yoke and color band of high lustre Poly Twill. Collar 6 Stand: Style and dimensions as sample on display. Collar points to measure 31/4" long with fuse" Mylar stays. Collar height at rear 1 W. Topstitched 1/4" off the edge. Collar stand to measure 15/18" at rear. Collar and band to be die cut. Collar interlined with 5250 Dacron. Hand interlined with "Crease N Tack". Front: The left front shall have a top center 1 W wide with two rows of stitches 718" apart The shirt will have 7 buttons and buttonholes on the front; spacing between each will be 3 314" except the spacing between the neck button and the first button on the front, which will be 31/4 ". Top center interlined with #250 Dacron. The fronts shall be joined to the yoke so that both raw edges of the yoke are turned under, with the front sandwiched between, oraf than all three are stitched down with a 1116" raised stitch. Safety stitch joining unacceptable. A 15" nylon zipper, to be set below the second button and buttonhole shall accomplish front closure. The top, second and bottom buttons to be attached to the right front the balance to be sewn over the buttonholes on the left front Shoulder Straps: Style and dimensions as sample. Asymmetrical shape topstitched 1/4" off the edge to be set on yoke with leading "Itches coMairting with front Joining seam. To measure 2" at sleeve tapering to 13/8" and set not more than 1/2" from folded collar. Cross - stitched apprordmabty 2 "from sleeve seam. Creased and edge stitched shoulder strap construction unacceptable. Badge Two-ply sling 1" wide conteried over left pocket and stitched to shoulder seam Reinforcement: and flap setting stitch. To have 2 buttonhole eyelets appr admately 1 114" from top of pocket flap spaced 11/4" apart and centered on sling. Pockets: Two breast pockets with 1 1/2" stitched pleats and mitered comers. Pocket to measure 5 518" wide, 6" deep. Lai breast pocket to have 11/2' pencil stitch.