Reso 2012-1962 - Laserfiche WebLink

Home Browse Search

BID allFM-20RLM CITY OF HALLANDALE BEACH PAGE 22 OF35 FLORIDA 8PECIFICATIONB THIS 0 NOT AN ORDER WAISTBAND: The trouser wig be made with the Freedom Fit® waistband system, which is designed to provide the wearer with a more confortable and better fitting trouser. The waistband shag be constructed using the "closed method" and shall measure 2" wide when finished. The waistband closure shall be accomplished with a crush proof hook and eye. The hook and eye shall be reinforoed with stays made of a non -woven fabric that are anchored by the topstitching for the fly facing and curtain. This topstitching must be to the top of the waistband. The waistband must be topstitched 1 /16 "bekhw the waistband seam for added strength. The top portion of the inside of the waistband is to consist of the same fabric as used for pocketing (70% polyester 30% cotton - minimum 80 X 62 (+/-) 2 count). The fabric Is to be cut on the bias for maximum comfort. To be 17/80 wide and to finish 1 1/8" wide after constnxtlon. Upper waistband curtain to be inner lined with stretch Ban -Rol canvas. This canvas fabric consists of a warp of 47 ends of texturized nylon and a fill of 34 ends of 760 denier polyester monotiilament. The woven fabric is coated with latex, which completely encapsulates all yams. This finish canvas fabric weighs 12.0 oz/yd2. The canvas will be cut 1 112" wide with the monofilaments running vertically and have a 10% stretch. The bottom portion of the waistband curtain will be a blend of 32% nylon, 38% polyester, 18% rubber (3 stn1hds)11 % lycxa and I% acrygc woven 1718" wide and to finish 1 318" wide. To have a minimum of 40% stretch characteristics. Note: In a performance sb*M waistband, the upper and lower portion of the band wig perform Differentfunctions The upper portion should allow a comfort fit at the waist when bending or sitting, and must maintain a crisp, clean appearance at the outer waistband. This part of the band will stretch 10% and be firm enough to prevent waistband rollover. The bottom portion of the waistband stretches over the hip to give support to the lower back and abdomen. In addition, this high stretch portion of the band should constantly be pressed up by the hips, preventing the slack from slipping down while being wom, even if heavy keys, change, or other items we carried in the pockets or on Ow belt. The three (3) rubberized strands ensure that shirts stay tucked in for neat appearance. ML Trouser shall have a metal memory lock zipper. There shall be a French Fly tab closure on the inside Of the right fly. The tab shag be double ply made of the but cloth (tabs mode of pocketing material or a "grown on" French Fly will be cause for rejection). The right fly shall be lined with the same fabric as the waistband curtain and pocketing. The fly lnhg shag be sewn to the left fly below the zipper in a neat and durable manner. A button shall be located on the left fly corresponding with the French Fly tab to provide a dean and comfortable coaure. There shag be a firm straight bartadk at the bottom of the fly going through the zipper tape.