Add No 1 - Laserfiche WebLink

Home Browse Search

coated with specified emulsified asphalt. F. If the CONTRACTOR requests in writing to "feather" the longitudinal edge, and if written permission is granted to "feather" the asphalt by the Department and the local municipality, a sanded mix of 70-30 type shall be used. 1. "Feathering" shall begin 18 inches from the tapered edge. G. Prior to installing a full lane width overlay over existing asphalt the trench and shoulders over the pipe shall be sawcut and filled with asphalt to the required depth and terminating flush with the existing adjacent asphalt in accordance with the municipality having jurisdiction over the work for Types I, II. 1. Type V overlay will be installed as detailed above. H. When a minor amount of asphalt surface will remain, generally with large pipe installations, after the pipe is installed and the required longitudinal saw cutting the asphalt, the CONTRACTOR may request permission to remove the asphalt in the lane, at his expense, by saw cutting the asphalt adjacent to the existing lane, then placing the Type V overlay flush with the adjacent asphalt. 1. This would require that the Type I, II finish elevation be lowered 1 inch to allow for the Type V overlay. I. Before the overlay is applied, existing surfaces shall be swept clean of dirt and debris, using a power driven broom if warranted by the size of the location to be overlaid and/or as ordered by the ENGINEER. 1. Pavement edges shall be cleared of encroaching vegetation, loose sand, rock and other foreign matter. 2. When this existing surface is thoroughly clean, approximately 0.10 gallon per square yard immediately followed by the asphaltic concrete overlay. 3. The tack coat shall not advance ahead of the paving by more than 300 feet in business or residential areas unless otherwise approved by the ENGINEER. 4. When the existing surface is thoroughly clean, a tack coat of Emulsified asphalt, Grade PS-2 (anionic) shall be applied at the rate of approximately 0.10 gallon per square yard, immediately followed by the asphaltic concrete overlay. 5. The tack coat shall not advance ahead of the paving by more than 300 feet in business or residential areas unless otherwise approved by the ENGINEER. J. Machine-Iaid overlay shall be place by means of an approved mechanical City of Sunny Isles Beach NE 174th Street Roadway Improvements 02743 - 7 Bituminous Concrete Pavement 14-1758 / 09-19-2014