Laserfiche WebLink
1 Pro Grass <br /> 1 First in Turf <br /> 1 <br /> 6.3 The full width rolls shall be laid out across the playing field. Utilizing state of the art sewing or <br /> gluing procedures, each turf panel shall be attached to the next forming the fabric of the field. <br /> 1 When all of the rolls of the playing surface have been installed;the sideline areas shall be installed at <br /> right angles to the playing field. <br /> 1 6.4 Turf-Set 73 brand hot melt adhesive will be applied for attachment of turf when mechanically <br /> sewn seams are not feasible. This applies to the installation of any inlaid lines such as, but not <br /> limited to the following: batter's box,foul lines, coach's box and logos. Turf-Set 73 is a light color, <br /> 1 low odor pressure sensitive adhesive. <br /> 6.5 The homogeneous infill mixture to be applied shall be spread evenly with a top dresser <br /> (minimum 5 foot wide)or broadcast spreaders in multiple lifts. During application,the infill area shall <br /> be brushed with a motorized rotary brush,to ensure uniformity and maximum fiber visibility. SINGLE <br /> PASS MACHINES/TECHNIQUES ARE NOT PERMITTED. <br /> 6.6 At completion of the infill,the entire surface shall be thoroughly brushed with a nylon rotary <br /> brush until the fiber simulates natural grass. NO STEEL BRUSHES PERMITTED. <br /> 7.o PROJECT CLOSEOUT AND MAINTENANCE <br /> The turf installer and/or the turf manufacturer must provide the following: <br /> 7.1 A grooming attachment to be pulled by the owner's equipment. <br /> 7.2 An executed copy of the turf manufacturer's warranty. <br /> 7.3 Manufacturer's written maintenance manual. <br /> 1 <br /> 1 <br /> 1 <br /> 1 <br /> 1 <br /> 960 Penn Avenue, 8th Floor • Pittsburgh, PA 15222 • 412.434.6003 • Toll-Free 866.270.6003 • Fax 412.391.2270 <br /> ProGrass RFP No. 12-10-03 n 68 <br />