Laserfiche WebLink
Scissor Lift SLX Series <br />Planning sheet submission required with your order or request for quotation. Please mark appropriate response to each numbered item (front and back) <br />by <br />Scissor Lift—SLX Series <br /> Quantity <br /> 10 ft.—Model SLX10 <br /> 14 ft.—Model SLX14 <br /> 17 ft.—Model SLX17 <br /> 21 ft.—Model SLX21 <br /> 24 ft.—Model SLX24 <br /> 28 ft.—Model SLX28 <br />2 Standard, factory set “show” position is 36" (914 mm) below <br /> “store” position. “Show” position can be adjusted after <br /> installation. For “show” position of more or less than 36" <br /> (914 mm), list show position: <br /> <br />3 Select Powder Coat Finish: <br /> White (Standard) Black <br /> Trim Ring Only (Standard) <br /> Entire Environmental Air Space Housing (Optional) <br />1 Select one model based on the maximum exact distance you need the projector to descend from “store” position to <br /> “service” position. <br />DRAPER SALESPERSON: <br />CUSTOMER CONTACT: <br />SIGNATURE: <br />Copyright © 2016 Draper Inc. Form ScissorLiftSLX_Sub-PlanSheet16-R Printed in U.S.A. <br />DEALER NAME: <br />PROJECT NAME: <br />P.O. #: <br />DATE: <br />(Continued on Page 2) <br /> <br /> <br />Table A <br /> Closed Extended Model Height Height <br /> SLX10 141/16" (36 cm) 10'7" (232 cm) <br /> SLX14 165/16" (42 cm) 14'2" (432 cm) <br /> SLX17 189/16" (47 cm) 17'8" (538 cm) <br /> SLX21 2013/16" (53 cm) 21'3" (648 cm) <br /> SLX24 231/16" (60 cm) 24'9" (754 cm) <br /> SLX28 255/16" (65 cm) 28'5" (866 cm) <br />Specifications—Scissor Lift SLX <br /> video projector lifts for projectors weighing up to 350 lbs (158.8kg). <br />White or black powder coat finish. Projector bolts onto operating pan, or <br />mounts to pan with mounting bracket (by others). Electrically operated 110- <br />120V AC, 60 Hz. UL recognized gearmotor, with metal chain drive system, to <br />be lifetime lubricated. <br />Projector to be suspended from steel pan supported by steel scissor arms <br />and operated by two, 3/16" (4.7625 mm) aircraft cables with 4200 foot/pounds <br />tensile strength per cable. <br />Equipped with 3 sets of stabilizing scissors, positioned on the left, right, and <br />rear sides. Also equipped with fail-safe inertial safety belt system and Cable <br />Management System with projector power cord. Factory set limit switches to <br />automatically stop travel at store, show, and service positions. Single Station <br />Low Voltage Control, standard, consists of one 3-button wall switch to lower lift <br />from “stored” to “show ” position, and one momentary key switch to lower lift to <br />“service” position. <br />Scissor Lift SLX is approved to UL 2442 and CSA C22.2 No. 60065-03. <br />Optional Current Sensor available. <br />Optional Environmental Air Space Housing: Consists of suitable painted <br />steel panels for use in return air plenum situations. Includes trim ring for <br />ceiling opening. Two sizes available. <br />Optional ceiling closure panel: Finished in white baked textured powder <br />coat, shall descend smoothly with projector. Two sizes available. <br />Ceiling Finish Kit: Finished white. Trims ceiling opening when required. <br />Consists of trim ring and closure panel. Two sizes available. <br />Factory-installed control cables available. <br />Please Note: The Scissor Lift SLX should be specified in conjunction with a <br />Draper motorized screen. <br />Optional Ceiling Access Door: Provides access to projector and lift when <br />unit is installed above hard ceiling. Two styles: White painted finish or accepts <br />ceiling tile. <br />Patented by Draper, Inc. <br />Patent information available at http://www.draperinc.com/legal/patents/ <br />Downloadable 3-part specifications are available at www.draperinc.com. <br />363/16" <br />(919 <br />mm) <br />385/16" <br />(973 <br />mm) <br />359/16" (903 mm) <br />3711/16" (957 mm) <br />See <br />Ta ble <br />A <br />357/16" (900 mm) <br />371/16" (941 mm) <br />42" (1067 mm) <br />36¼" (921 mm)391/16" (992 mm)42" (1067 mm) <br />35" (889 mm)19/16" <br />(39.6875 <br />mm) <br />1/8" <br />(3.175 <br />mm) <br />Top View <br />Front View Side View <br />39 1/8" (994mm) x 39 1/8" (994mm) <br />Lipless Closure Dimensions <br />For drawings/dims <br />with Environmental Air <br />Space Housing, see <br />page 3. <br />There are two <br />sizes of closure. <br />See page 3. <br />There are two <br />sizes of closure. <br />See page 3. <br />16" (406 mm) threaded rod <br />included. Can be cut down to <br />match projector and mount dims. <br />Draper does not recommend setting show position at the maintenance/ <br />service position. For example, if you wish to have 8' (2.4 m) Show position, <br />order a lift with at least a 10' (3 m) maintenance position. <br />Submittal and Planning sheet