|
4
<br />A/V Interface Control configured as a Special Function
<br />Control (GRX-AV configured as 4Q)
<br />Unlike the other controls, the first parameter will be a capital
<br />letter if any of the control’s four functions, Sequence, Zone Lock,
<br />Scene Lock or Fade Overide, are active. A lower case letter
<br />indicates that no functions are active. The second parameter will
<br />be a character that contains encoded information about which
<br />functions are active. For details on the format of this response,
<br />contact Lutron.
<br />Master Control (NTGRX-4M)
<br />Partition Control (NTGRX-4PS)
<br />The status of these Accessory Controls cannot be decoded by the
<br />Programming Interface. When buttons are pushed on the Master
<br />Control and Partition Control, 1s and 0s may be returned by the
<br />RS232 Interface.
<br />DIP Switch 7: SCENE STATUS—In the ON position, the
<br />Programming Interface will return the current scene of all eight
<br />GRAFIK Eye Control Units on the MUX link when a new scene is
<br />selected. The response will be a ":ss", followed by a string of
<br />eight ASCII characters, one for each GRAFIK Eye Control Unit.
<br />Each character represents the scene of each GRAFIK Eye Control
<br />Unit. The scene will be indicated by its number. Scene 10 will be
<br />indicated by an 'A'; scene 11 will be indicated by a 'B', and so on
<br />up to scene 16. A '0' will be returned if the GRAFIK Eye Control
<br />Unit is off, and an 'M' will be returned if the GRAFIK Eye Control
<br />Unit is missing or not responding. An 'R' will be returned if a
<br />Master Raise is being sent, and an 'L' will be returned if a
<br />Control Unit is sending a Master Lower. Regardless if this switch
<br />is in the ON or OFF position, the current scene can be obtained
<br />by using the REQUEST SCENE STATUS command. See the
<br />GRAFIK Eye RS232 Protocol and Command Set (P/N 040-138)
<br />included with the GRX-PRG unit for details.
<br />DIP Switches
<br />EXAMPLE of response:
<br />:ssM180R2D2<CR><LF>
<br />Control Unit A1 is missing
<br />Control Unit A2 is in scene 1
<br />Control Unit A3 is in scene 8
<br />Control Unit A4 is off
<br />Control Unit A5 is sending a Master Raise
<br />Control Unit A6 is in scene 2
<br />Control Unit A7 is in scene 13
<br />Control Unit A8 is in scene 2
<br />DIP Switch 8: Timeclock ON/OFF—In the ON position, the
<br />internal timeclock of the GRX-PRG can control the operation of
<br />the GRAFIK Eye Control Unit(s). Timeclock schedules and the
<br />Super Sequence are configured and programmed using Lutron's
<br />GRAFIK Eye LIAISON software.
<br />Internet: www.lutron.com
<br />E-mail: product@lutron.com
<br />WORLD HEADQUARTERS
<br />Lutron Electronics Co. Inc.,
<br />7200 Suter Road, Coopersburg, PA 18036-1299 U.S.A.,
<br />TOLL FREE: (800) 523-9466 (U.S.A., Canada, Caribbean), Tel: (610) 282-3800;
<br />International 1- 610-282-3800, Fax: (610) 282-3090; International 1-610-282-3090
<br />ASIAN HEADQUARTERS
<br />Lutron Asuka Co, Ltd.,
<br />2F, Kowa Shiba-Koen Bldg., 1-11, Shiba-Koen 1 chome, Minato-ku, Tokyo, 105-0011 Japan,
<br />TOLL FREE: (0120) 083417 (Japan), Tel: (03) 5405-7333;
<br />International 81-3-5405-7333, Fax: (03) 5405-7496; International 81-3-5405-7496
<br />EUROPEAN HEADQUARTERS
<br />Lutron EA Ltd.,
<br />Lutron House, 6 Sovereign Close, Wapping, London, E1 9HW, United Kingdom,
<br />FREEPHONE: 0800 282107 (U.K.), Tel: (171) 702-0657;
<br />International 44-171-702-0657, Fax: (171) 480-6899; International 44-171-480-6899
<br />HONG KONG SALES OFFICE
<br />Lutron GL (Hong Kong)
<br />Unit 2911, 29th Floor, Bank of America Tower, Central, Hong Kong,
<br />Tel: 2104-7733; International 852-2104-7733, Fax: 2104-7633; International 852-2104-7633
<br />SINGAPORE
<br />Lutron GL Ltd.,
<br />6A Upper Cross Street, Singapore 053326,
<br />Tel: 220 4666; International 65 220 4666, Fax: 220 4333; International 65 220 4333
<br />Lutron Electronics Co., Inc.
<br />Made and printed in U.S.A. 2/99
<br />P/N 040-156 Rev. A
<br />WARRANTY
<br />Lutron warrants each new unit to be free from defects in materials and workmanship and to
<br />perform under normal use and service. This warranty shall run only for a period of one year
<br />from the date of purchase and Lutron's obligations under this warranty are limited to remedy-
<br />ing any defect or replacing any defective part and shall be effective only if the defective unit is
<br />shipped to Lutron postage prepaid within 12 months after purchase. Damage due to abuse,
<br />misuse, inadequate wiring or installation is not covered by this warranty.
<br />In no event shall Lutron or any other seller be liable for any other loss or damage, including
<br />consequential or special damages that may arise through the use by a purchaser or others of
<br />this device and the purchaser assumes and will hold harmless Lutron in respect of all such
<br />loss.
<br />Although every attempt is made to ensure that catalogue information is accurate and up-to-
<br />date, please check with Lutron before specifying or purchasing this equipment to confirm
<br />availability, exact specifications and suitability for your application.
<br />This product may be covered by one or more of the following U.S. patents: 4,797,599;
<br />4,825,075; 4,893,062; 4,924,157; 5,030,893; 5,191,265; 5,430,356; 5,463,286; 5,530,322;
<br />5,808,417; DES 308,647; DES 310,349; DES 311,170; DES 311,371; DES 311,485; DES
<br />311,678; DES 313,738; DES 335,867; DES 344,264; DES 370,663; DES 378,814 and corre-
<br />sponding foreign patents. U.S. and foreign patents pending.
<br />Lutron and GRAFIK Eye are registered trademarks and LIAISON is a trademark of Lutron
<br />Electronics Co., Inc.
<br />© 1999 Lutron Electronics Co., Inc.
|