Laserfiche WebLink
FT2A-CBLR-GR Series <br />Gravity Cable Retractors for FT2 Series <br />crestron.com | 800.237.2041 <br /> >Convenient and cost-effective connectivity for FT2 Series FlipTops™ <br /> >Precision gravity-assisted track and pulley retraction mechanism <br /> >Cable pulls out smoothly to any length up to 34 inches (86 cm) <br /> >Cable retracts gracefully by simply lifting it vertically above the table <br /> >Highly flexible, low friction flat cable construction <br /> >Robust soft-feel sculpted connectors for easy handling <br /> >Durable construction for years of reliable use <br /> >Backlit international symbol icon identifies the connector type [1] <br /> >Active 4K models support 4K60 4:4:4 digital AV signals <br /> >Support for HDR and HDCP 2.2 <br /> >4K models available for HDMI® and DisplayPort devices <br /> >Additional 4K models available to convert from DisplayPort to <br />HDMI, Mini DisplayPort to DisplayPort, Mini DisplayPort to HDMI, <br />and USB-C™ to HDMI <br /> >Passive models available for VGA, stereo audio, LAN, and USB 3.0 <br /> >Requires two module spaces at either end of a FlipTop module row <br /> >Optional mid-row installation using additional brackets <br /> >Retractor housing snaps onto the FlipTop chassis and extends <br />vertically beneath the table <br /> >Requires 28-7/16 inch (722 mm) vertical clearance below the <br />table top surface <br /> >Provides a 4 foot (1.2 meter) long tail below the table <br />Crestron® Gravity Cable Retractors (FT2A-CBLR-GR Series) offer a refined <br />cable management solution for use with Crestron FT2 Series FlipTops™. <br />Each cable pulls out smoothly to any length up to 34 inches (86 cm) and <br />stays out as long as it remains laying on the tabletop. Simply lifting the <br />cable vertically above the FlipTop™ allows the cable to retract gently back <br />into the FlipTop. Gravity cable retractors use a precision gravity-assisted <br />track and pulley mechanism housed in a vertical enclosure beneath <br />the table. <br />Each Gravity Cable Retractor is composed of a retractor enclosure and <br />pass-through module. The enclosure attaches to the FlipTop chassis <br />beneath the table, while the module installs in the top of the FlipTop. <br />A 4 foot long cable tail is provided below the table for connection to a <br />DM® transmitter or similar interface device. The pull-out end of the cable <br />passes up through the module so that the connector nests neatly in place <br />and pulls out easily for use. Each module is labeled with an international <br />symbol icon indicating the connection type, which is backlit when installed <br />in an “Electrical” FT2 FlipTop. When installed in a “Mechanical” FlipTop, <br />the symbol icon remains legible but is not backlit. <br />The pass-through module occupies two module spaces within the FlipTop. <br />The retractor enclosure slides onto the side of the FlipTop chassis beneath <br />the table and locks into place with a snap. Retractors normally install at the <br />left and right ends of a module row, but can also be installed in the middle <br />of a row by adding an FT2A-CBLR-BRKT series mid-row adapter bracket <br />(one per row, each sold separately). Installation requires 28-7/16 inches <br />(722 mm) minimum vertical clearance below the top surface of the table. <br />End-mounted retractors require 2-3/8 inches (60 mm) horizontal clearance <br />to either side of the chassis, while mid-row retractors require 2-3/4 inches <br />(70 mm) horizontal clearance to the front or rear of the chassis. <br />Several models of gravity cable retractors are offered. The following “4K” <br />models feature a minimum TMDS bandwidth of 18 Gbps to support ultra <br />high-definition digital video signals up to 4K60 4:4:4. Active circuitry is <br />employed for optimal performance. <br />• HDMI® to HDMI – Model FT2A-CBLR-GR-4K-HD provides a retractable <br />High-Speed HDMI® cable with a male HDMI Type A connector at <br />both ends. <br />• DisplayPort to DisplayPort – Model FT2A-CBLR-GR-4K-DP provides <br />a retractable DisplayPort cable with a male DisplayPort connector at <br />both ends. <br />• DisplayPort to HDMI – Model FT2A-CBLR-GR-4K-DP-HD provides a <br />retractable cable with a male DisplayPort connector at the source end <br />above the table and a male HDMI Type A connector at the sink end <br />below the table; converts DisplayPort to HDMI to allow connection of a <br />DisplayPort source to an HDMI input. <br />• Mini DisplayPort to DisplayPort – Model FT2A-CBLR-GR-4K-MDP-DP <br />provides a retractable cable with a male Mini DisplayPort connector at <br />the source end above the table and a regular-sized male DisplayPort <br />connector at the sink end below the table; converts Mini DisplayPort to <br />standard DisplayPort to allow connection of a Mini DisplayPort source to <br />a DisplayPort input. <br />• Mini DisplayPort to HDMI – Model FT2A-CBLR-GR-4K-MDP-HD <br />provides a retractable cable with a male Mini DisplayPort connector at <br />the source end above the table and a male HDMI Type A connector at <br />the sink end below the table; converts Mini DisplayPort to HDMI to allow <br />connection of a Mini DisplayPort source to an HDMI input. <br />• USB-C™ to HDMI – Model FT2A-CBLR-GR-4K-USBC-HD provides a <br />retractable cable with a male USB Type-C™ connector at the source <br />end above the table and a male HDMI Type A connector at the sink end <br />below the table; converts USB-C to HDMI to allow connection of a <br />USB-C source to an HDMI input. <br />Model FT2A-CBLR-GR-4K-HD shown <br />(module portion)