Laserfiche WebLink
FT2A-CBLR-GR Series Gravity Cable Retractors for FT2 Series <br />crestron.com | 800.237.2041 <br />Additional models are available to support analog AV and data signals. <br />These cables retractors are passive. <br />• VGA – Model FT2A-CBLR-GR-VGA provides a retractable VGA cable <br />with a male HD15 connector at both ends; supports resolutions up to <br />Full HD 1080p. <br />• Stereo Audio – Model FT2A-CBLR-GR-AUDIO provides a retractable <br />unbalanced stereo audio cable with a male 3.5 mm mini-TRS connector <br />at both ends. <br />• LAN – Model FT2A-CBLR-GR-CAT6 provides a retractable CAT6 LAN <br />cable with a male RJ-45 connector at both ends. <br />• USB 3.0 – Model FT2A-CBLR-GR-USB provides a retractable USB 3.0 <br />cable with a male USB Type-A connector at both ends. <br />Should the cable within an FT2A-CBLR-GR series retractor ever become <br />damaged, it can be replaced on site using a new FT2A-CBL-PT <br />series cable. <br />Note: See also the FT2A-CBLR-1T Series “One-Touch” Cable Retractors for <br />applications with limited vertical space beneath the table. <br />SPECIFICATIONS <br />Cable <br />Pull-Out Length: Up to 2.83 ft (0.86 m) above table <br />Back End Tail Length: 4 ft (1.2 m) beneath table <br />Indicator <br />Symbol Icon: (1) Blue LED backlit icon indicating the cable connector type, <br />illuminates constantly when FlipTop is powered [1] <br />Environmental <br />Temperature: 32° to 113° F (0° to 45° C) <br />Humidity: 10% to 90% RH (non-condensing) <br />Construction <br />Pass-Through Module: Precision fit plastic drop-in module, 2-space, black <br />Retractor Enclosure: Metal housing with plastic neck <br />End Mounting: <br />• Module requires two consecutive module spaces at the left or right <br />end of any module row within the FlipTop chassis; <br />• Enclosure attaches beneath the table to mounting slots on the left or <br />right side of the FlipTop chassis; <br />• Requires 28.4 inches (722 mm) minimum vertical clearance beneath <br />the top surface of the table; <br />• Projects 2.15 inches (55 mm) from the side of the FlipTop chassis <br />beneath the table, and requires an additional 0.2 inch or 5 mm <br />for installation <br />Mid-Row Mounting: <br />• Requires an FT2A-CBLR-BRKT series mid-row adapter bracket (one <br />per row, each sold separately); <br />• Module requires two consecutive module spaces in the middle of <br />any module row within the FlipTop chassis (refer to the relevant <br />FT2A-CBLR-BRKT model spec sheet for additional details); <br />• Enclosure attaches beneath the table to mounting slots on the front <br />or rear of the FlipTop chassis (via the bracket); <br />• Requires 28.4 inches (722 mm) minimum vertical clearance beneath <br />the top surface of the table; <br />• Projects 2.55 inches (65 mm) from the front or rear of the FlipTop <br />chassis beneath the table, and requires an additional 0.2 inch or <br />5 mm for installation <br />Dimensions <br />Height: 25.80 in (656 mm) <br />Width: 4.07 in (104 mm) <br />Depth: 1.85 in (47 mm) <br />Dimensions shown are for the retractor enclosure only <br />Notes: <br />1. The symbol icon on the top face of the module is only backlit when installed in an FT2 ELEC <br />series “Electrical” FlipTop. When installed in an FT2 MECH series “Mechanical” FlipTop, it is not <br />backlit but remains legible. <br />This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact <br />the Crestron sales representative for your area. A list of sales representatives is available online at <br />https://www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855-263-8754. <br />The specific patents that cover this and other Crestron products are listed online at <br />https://www.crestron.com/legal/patents. <br />Certain Crestron products contain open source software. For specific information, please visit <br />https://www.crestron.com/opensource. <br />Crestron, the Crestron logo, DM, FlipTop, and FlipTops are either trademarks or registered <br />trademarks of Crestron Electronics, Inc. in the United States and/or other countries. HDMI is <br />either a trademark or registered trademark of HDMI Licensing LLC in the United States and/or <br />other countries. USB-C and USB Type-C are either trademarks or registered trademarks of <br />USB Implementers Forum, Inc. in the United States and/or other countries. Other trademarks, <br />registered trademarks, and trade names may be used in this document to refer to either the <br />entities claiming the marks and names or their products. Crestron disclaims any proprietary <br />interest in the marks and names of others. Crestron is not responsible for errors in typography <br />or photography. Specifications are subject to change without notice. <br />©2018 Crestron Electronics, Inc.