Laserfiche WebLink
DM-TX-4K-100-C-1G Wall Plate 4K DigitalMedia 8G+® Transmitter 100 <br />crestron.com | 800.237.2041 <br />Audio <br />Input Signal Types: HDMI (Dual-Mode DisplayPort compatible [4]) <br />Output Signal Types: DM 8G+, HDBaseT <br />Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, <br />Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS-HD High <br />Res, DTS-HD Master Audio™, LPCM up to 8 channels <br />Communications <br />RS-232: 2-way device control and monitoring up to 115.2k baud with <br />software handshaking (via control system) [1] <br />IR/Serial: 1-way device control via infrared up to 1.1 MHz or serial <br />TTL/RS-232 (0-5 Volts) up to 19.2k baud (via control system) [1] <br />DigitalMedia: DM 8G+, HDCP 2.2, EDID, CEC [7], PoDM <br />HDBaseT: HDCP 2.2, EDID, CEC [7], PoE <br />HDMI: HDCP 2.2, EDID, CEC [7] <br />Connectors – Front <br />HDMI IN: (1) 19-pin Type A HDMI female; <br />HDMI digital video/audio input; <br />(DVI and Dual-Mode DisplayPort compatible [4]) <br />IR OUT: (1) 2-pin 3.5 mm detachable terminal block; <br />IR/Serial port [1]; <br />IR output up to 1.1 MHz; <br />1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud <br />COM: (1) 3-pin 3.5 mm detachable terminal block; <br />Bidirectional RS-232 port [1]; <br />Up to 115.2k baud, software handshaking support <br />Connectors – Rear <br />G: (1) 6-32 screw; <br />Chassis ground lug <br />DM OUT: (1) 8-pin RJ45 female, shielded; <br />DM 8G+ output, HDBaseT compliant; <br />PoDM PD port (HDBaseT PoE compatible) [5,6]; <br />Connects to the DM 8G+ input of a DM switcher, receiver, or other DM <br />device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or <br />Crestron DM-CBL-ULTRA cable [2] <br />24VDC 0.75A: (1) 2-pin 3.5 mm detachable terminal block; <br />24 Volt DC power input; <br />PW-2407WUL power pack included <br />Indicators <br />PWR: (1) Green LED, indicates operating power supplied via PoDM, <br />HDBaseT PoE, or local power pack <br />VIDEO: (1) Green LED, indicates video signal presence at the HDMI input <br />DM OUT (rear): (2) LEDs, green LED indicates DM link status, amber LED <br />indicates video and HDCP signal presence <br />Power <br />Power Pack (included): Input: 100-240 Volts AC, 50/60 Hz <br /> Output: 0.75 Amps @ 24 Volts DC <br /> Model: PW-2407WUL <br />Power over DM (PoDM): IEEE 802.3at Type 1 Class 3 (12.95 W) compliant <br />PoDM PD (Powered Device), capable of being powered by a PoDM PSE <br />(Power Sourcing Equipment) [5] <br />Power over HDBaseT: IEEE 802.3at Type 1 Class 3 (12.95 W) compliant <br />HDBaseT PoE PD (Powered Device), capable of being powered by an <br />HDBaseT PoE PSE (Power Sourcing Equipment) [6] <br />Power Consumption: 4 Watts typical; <br />2.3 Watts idle <br />Environmental <br />Temperature: 32° to 104° F (0° to 40° C) <br />Humidity: 10% to 90% RH (non-condensing) <br />Heat Dissipation: 13.7 BTU/hr <br />Enclosure <br />Construction: Metal, black finish with white or black polycarbonate <br />label overlay <br />Flush Wall Mount: Mounts in a 1-gang 3-1/2” deep electrical box or <br />plaster ring, requires decorator style faceplate (not included) <br />Surface Mount: Surface mount bracket included <br />Rack Mount: Attachable to a single 19-inch EIA rack rail <br />Dimensions <br />Height: 4.12 in (105 mm) <br />Width: 1.72 in (44 mm) <br />Depth: 2.35 in (60 mm) <br />Weight <br />6.3 oz (179 g)