Laserfiche WebLink
Gateway Park Center PERKINS+WILL <br /> 810495.000 <br /> 12/06/18 <br /> <br /> <br />FLUSH WOOD DOORS <br /> 08 14 16 - 1 <br /> <br /> <br />SECTION 08 14 16 - FLUSH WOOD DOORS <br />PART 1 - GENERAL <br />1.1 SUMMARY <br />A. Section Includes: <br />1. Solid-core flush wood doors with plastic-laminate-faces. <br />2. Factory fitting flush wood doors to frames and factory machining for <br />hardware. <br />1.2 ACTION SUBMITTALS <br />A. Product Data: For each type of product, including the following: <br />1. Door core materials and construction. <br />2. Door edge construction <br />3. Door face type and characteristics. <br />4. Door trim for openings. <br />5. Factory-machining criteria. <br />B. Shop Drawings: Indicate location, size, and hand of each door; elevation of each <br />type of door; construction details not covered in Product Data; and the following: <br />1. Door schedule indicating door location, type, size, fire protection rating, and <br />swing. <br />2. Door elevations, dimension and locations of hardware, lite and louver cutouts, <br />and glazing thicknesses. <br />3. Details of electrical raceway and preparation for electrified hardware, access <br />control systems, and security systems. <br />4. Dimensions and locations of blocking for hardware attachment. <br />5. Dimensions and locations of mortises and holes for hardware. <br />6. Clearances and undercuts. <br />7. Apply AWI Quality Certification Program label to Shop Drawings. <br />C. Samples for Verification: <br />1. Plastic laminate, 6 inches square, for each color, texture, and pattern <br />selected. <br />2. Corner sections of doors, approximately 8 by 10 inches, with door faces and <br />edges representing actual materials to be used. <br />1.3 INFORMATIONAL SUBMITTALS <br />A. Qualification Data: For door inspector.