Reso 2019-2929 - Laserfiche WebLink

Home Browse Search

TECHNICAL. SPECIFICATIONS Proposal #: 29583 I. DESIGN CRITERIA Structure shall be designed to be free standing, open air pavilion in conformance with all applicable building code. Manufactured by RCP Shelters: 2100 SE Rays Way, Stuart, FL 34994 • Toll-free: 800-525-0207 • F:772-288.0207 http,//www.rc helters.cam • info@ rcosheiters.com, 11. SCOPE Structure shall be an all steel pavilion over'a 4" minimum thickness reinforced concrete slab. Shelter shall have a clear space, without.a center column or open knee bracing. Structure shall be designed by professional engineers. The owner or contractor shall be responsible for unloading, temporary storage, soil testing (if necessary), site preparation, concrete slab, and erection of structures. Owner or contractor Is responsible for protection of materials after arrival. III, COLUMNS The shelter shall be set on prepared footings. Foundation shall be engineered to manufacturer's design and constructed to local code and good construction practices for the specific site conditions. The structure shall have tube steel corner columns. The columns shall be attached to the top of the concrete foundation by use of anchor bolts, hidden when possible. Anchor bolts shall be provided by owner or contractor so that foundations can be prepared and ready for installation upon delivery of the shelter. Alternatively, RCP Shelters offers an anchor bolt option, to be shipped upon receipt of drawing approval for fabrication. iV. FRAME All structural framing of the pavilion shall be structural tube steel with end caps to form a clean, neat appearance with no place for birds to nest or small animals to roost. The compression ringshall be structural steel plate. Since all connections will bolt together, field welding shall not be required. Bolts shall be concealed within the tubing when possible. V. POWDER COAT FINISH The columns and frame shall be sandblasted to near -white condition, five stage washed, including detergent, phosphate, and rust protectant sealant, epoxy primed, then top coated with TGIC powder. The columns and frame shall be packaged in foam, cardboard, and stretch wrap to protect the finish during transit. The color shall be selected from manufacturer's standard color chart. Field touch up painting shall be required by owner or contractor. VI. SAVE I ePITCH Eave height shall be minimum 7'-6". Roof pitch shall be 8:12. VII. ROOFING— MEGARIB(INCLUDED) The roof system shall be structural 24 -gauge exposed fastener Galvalume® panels with UY' high.ribs, 7.2" on center. Ribs shall run with the pitch of the roof for proper drainage. Roof panels shall be 3' wide and precut by the length from the eave to the ridge. Angles shall be factory precut. Matching roof trim & fasteners shall be supplied. Hip and ridge beams shall have cap plates for metal deck bearing, as metal deck cannot structurally bear on beam corner only. Panels and trim shall be pre -painted with the Kynar 5000 paint system. Color shall, be chosen by owner from the standard color chart, provided upon request. A. TRUE STANDING SRAM ROOFING - MEDALLION-LOK (OPTIONAL) True standing seam metal roofing shall be 24 -gauge Galvalume® panels with 1W high snap -together standing seams, with concealed clips, 12",16" or 18" on center, striated. Ribs shall run with the pitch of the roof for proper drainage. Roof panels shall be precut by the length from the eave to the ridge. Angles shall be field cut by Installer. Matching roof trim & fasteners shall be provided. Panels and.trim shall be pre -painted with the Kynar 5000 paint system. Color shall he chosen by owner from the standard color chart, provided upon request. VIIi. STEEL RAILINGS (OPTIONAL) Railings shall be Y:" plate steel pickets attached to 2" x 2" tube steel top and bottom rails between columns, Intermediate tube steal posts shall be included and sized as structurally necessary. Railings may be added on all but one side for entry and exit. Owner shall choose design: "P (picket), "0", or' X". RCP Shelters, Inc. • 2100 SE Rays Way, Stuart, FL 34994 Page Toll Free 800.525.0207 - Local 772.288-3600 • Fax 772-288.0207 + info@rcpshelters,com 4 http://www.rcpsheiters.com 4/5