Golden Shores Utility Underground Specs

Home Browse Search

CTA Project No. 19-0035-001-01 16050-12 Golden Shores Street Lighting October 12, 2020 SIB Bid No. 20-09-01 PART 3 - EXECUTION 3.01 GENERAL A. Install equipment in accordance with NECA 5055. 3.02 OUTLET AND DEVICE BOXES A. Install suitable for conditions encountered at each outlet or device in the wiring or raceway system, sized to meet NFPA 70 requirements. B. Size: 1. Depth: Minimum 2 inches, unless otherwise required by structural conditions. Box extensions not permitted. C. Locations: 1. Drawing locations are approximate. 2. To avoid interference with mechanical equipment or structural features, relocate outlets as directed by ENGINEER. D. Box Type (Nonmetallic Raceway System): 1. Exposed Raceways: Nonmetallic. 3.03 JUNCTION AND PULL BOXES A. Install where shown and where necessary to terminate, tap-off, or redirect multiple conduit runs. B. Install pull boxes where necessary in raceway system to facilitate conductor installation. C. Install in conduit runs at least every 150 feet or after the equivalent of thr ee right-angle bends. D. Use outlet boxes as junction and pull boxes wherever possible and allowed by applicable codes. E. Installed boxes shall be accessible. F. Do not install on finished surfaces. G. Install plumb and level. H. Support boxes independently of conduit by attachment to building structure or structural member. I. At or Below Grade: 1. Install boxes for below grade conduits flush with finished grade in location s outside of paved areas, roadways, or walkways. 2. If adjacent structure is available, box may be mounted on structure surface just above finished grade in accessible but unobtrusive location . 3. Obtain ENGINEER's written acceptance prior to installation in paved areas, roadways, or walkways. 4. Use boxes and covers suitable to support anticipated weights.