RFP 22-04-01 CITYWIDE FIBER NETWORK DEPLOYMENT

Home Browse Search

City of Sunny Isles Beach |Request for Proposal No. 22-04-01 27 Excavated material, except that which is to be used as backfill in the adjacent trench, shall not be stored in public streets unless otherwise permitted. After placing backfill, all excess material shall be removed immediately from the site. The foregoing provisions are in addition to and not in limitation of any other rights or remedies available to the City. 2.14 Discrepancies If a discrepancy or inconsistency is discovered in the plans, drawings, specifications or contract for the work in relation to any such law, ordinance, regulation, order or decree, the Contractor shall forthwith report the same to the Engineer in writing. 3. Fiber-Optic Cable 3.1 General Guidelines All cable, unless specifically called out, for shall be single-mode cable, rated for the environment in which it is installed. Installations shall be OSP rated dielectric. • Pre-Approved Product Sets The following product sets are pre-approved for this project. Except as noted, all others will require a substitution request to be completed and approved as per these documents. Sunny Isles will not consider product sets that have not been pre- approved or accepted as per the substitution request process. • Fiber-optic cable and connection/termination products shall be manufactured by one of the following: 1. Optical Cable Corporation 2. Corning 3. CommScope 4. OFS 5. Or approved alternate 3.2 Fiber Optic Cable All cables shall be loose tube or ribbon fiber. If ribbon fiber is to be used it shall be approved by the engineer before ordering. 3.3 Bend Radius The main risk of damage to the fiber-optic cable is by overlooking the minimum-bend radius. It is important to know that the damage occurs more easily when the cable is bent under tension, so when