Reso 2022-3352 - Laserfiche WebLink

Home Browse Search

to F.S. 318.14(2), in a separate transmittal where it is clearly indicated "E - CITATION FOLLOW-UP COPY". These citations must conform to requirements specified below (see sections A & B) regarding bar code, paper size, and paper quality. Information on citations must be standardized following FUTC format. A. Agency "E -CITATION FOLLOW-UP COPY" Paper Requirements: Automated Paper Citations, submitted as follow-up copies (# 14 above), or as interim FUTC's (#13 above) must adhere to the following specifications: 1. Size -Preferably the size of current Florida Uniform Traffic Citation, which is 8.5" by 4.25". We cannot accept sizes smaller than this. However, we do accept citations in 8.5" by 11" format in which the front of the citation is printed on the left panel and the back of the citation is printed on the right panel, per the Florida Highway Patrol (FHP) standard. 2. Ream Weight = 15 to 30 lb paper. 3. Thermal Paper submitted must be of sufficient thickness to uniformly pass through standard scanners without curling. 4. All documents/papers (carbonless, etc.) must be rubber roller safe — Ingredients used in paper and ink should not interact chemically with rubber — essentially they should be chemically inert. 5. Leading edge of paper documents exiting printing devices cannot curl up more than 3mm or curl down more than 5mm over a 30mm span from the edge of the paper. 6. All print must be black ink. B. Automated Barcode Requirements: 1. The barcode must be of good quality to be read by standard barcode readers. 2. Clerk's Office Standard Code is 3 of 9 (also known as "code39" or "USD -3") Current "de -facto" Standard with a 3:1 ratio Code 3 of 9 is an alphanumeric, self - checking, variable -length barcode that uses five black bars and four white bars to define a character. Three bars are wide, and six are narrow. A character is represented Page 5 81