Laserfiche WebLink
THE CITY OF SUNNY ISLES BEACH <br />PROJECT NO. 21-1011 <br />BUILDING DEPARTMENT RELOCATION TO ANNEX <br /> <br />Project No. 21-1011 November 2024 095126-2 <br />2. ASTM A 653 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) <br />by the Hot- Dip Process. <br />3. ASTM A 1008 Standard Specification for Steel, Sheet, and Cold Rolled <br />Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy <br />with Improved Formability. <br />4. ASTM C 635 Standard Specification for Metal Suspension Systems for <br />Acoustical Tile and Lay-in Panel Ceilings. <br />5. ASTM C 636 Recommended Practice for Installation of Metal Ceiling <br />Suspension Systems for Acoustical Tile and Lay-in Panels. <br />6. ASTM E 84 Standard Test Method for Surface Burning Characteristics of <br />Building Materials. <br />7. ASTM E 580 Application of Ceiling Suspension Systems for Acoustical Tile and <br />Lay-In Panels in Areas Requiring Seismic Restraint. <br />8. ASTM C 423 Sound Absorption and Sound Absorption Coefficients by the <br />Reverberation Room Method. <br />9. ASTM E 1264 Classification for Acoustical Ceiling Products. <br />10. Hardwood Plywood & Veneer Association (HPVA) <br />11. International Building Code <br />12. ASHRAE Standard 62 1 2004 Ventilation for Acceptable Indoor Air Quality <br />13. NFPA 70 National Electrical Code <br />14. ASCE 7 American Society of Civil Engineers, Minimum Design Loads for <br />Buildings and Other Structures <br />15. International Code Council-Evaluation Services - AC 156 Acceptance Criteria <br />for Seismic Qualification Testing of Non-structural Components <br />16. International Code Council-Evaluation Services Report - Seismic Engineer <br />Report <br />A. ESR 1308 - Armstrong T-Bar or Dimensional Suspension <br />17. California Air Resources Board (CARB) compliant <br />18. LEED - Leadership in Energy and Environmental Design is a set of rating <br />systems for the design, construction, operation, and maintenance of green <br />buildings <br /> <br />1.4 SUBMITTALS <br />a) Shop Drawings: Layout and details of ceilings. Show locations of items that are to <br />be coordinated with or supported by the ceilings. <br />b) Installation Instructions: Submit manufacturer’s installation instructions as <br />referenced in Part three, Installation. <br />c) Product Data: Submit manufacturer’s technical data for each type of ceiling unit <br />and suspension system required. <br />d) Samples: Real Wood Veneer on fire rated particle board – Semi-gloss tinted topcoat <br />– Clear Finish