Laserfiche WebLink
Membrane Type: SBS/SIS/SEBS <br />Deck Type 3I: Concrete, Insulated <br />Deck Description: Min. 2500 psi concrete or concrete plank <br />System Type A(13): All layers of insulation set in approved asphalt or adhesive. <br />All General and System Limitations apply. <br />One or more layers of any of the following insulations. <br />Base Insulation Laver: <br />ACFoam-II, ISO 95+ GL, H -Shield <br />Minimum 1.5" thick <br />Top Insulation Laver: <br />Structodek High Density Fiberboard Roof Insulation <br />Minimum '/x" thick <br />Insulation Fasteners Fastener <br />Table 3 Density/ft' <br />N/A N/A <br />Insulation Fasteners Fastener <br />Table 3 Density/ft' <br />N/A N/A <br />Note: Concrete deck shall be primed with ASTM D 41 asphalt primer and allowed to dry prior to application of <br />insulation except for insulation adhesive. All insulation shall be adhered to the deck in full mopping of approved <br />asphalt, HPR All Temp Asphalt or Garlastic KM Plus within the EVT range and at a rate of 20-40 lbs./100 ft, <br />or in %" — %" wide beads of Insul-Lock HR spaced 12" o.c. Please refer to Roofing Application Standard RAS <br />117 for insulation attachment. Insulation listed as base layer only shall be used only as base layers with a second <br />layer of approved top layer insulation installed as the final membrane substrate. <br />Base/Ply Sheet: One ply of StressBase 80, StressBase 120, F1exBase 80, F1exBase Plus 80, or FlexBase E 80 <br />base sheet adhered with a full mopping of approved asphalt, HPR All Temp Asphalt or <br />Garlastic KM Plus within the EVT range and at a rate of 25 lbs./sq. or Green -Lock Plus <br />Membrane Adhesive applied at 1.5 gal./sq. or adhered with Weatherking or Weatherking <br />Plus WC applied at 2'/2 gal./sq. <br />Membrane: One ply of OptiMax FR Mineral, StressPly E FR Mineral, StressPly FR Mineral, StressPly <br />Plus, StressPly Plus FR Mineral, StressPly EUV FR Mineral or VersiPly Mineral adhered <br />with a full mopping of approved asphalt, HPR All Temp Asphalt or Garlastic KM Plus <br />within the EVT range and at a rate of 25 lbs./sq.or Green -Lock Plus Membrane Adhesive <br />applied at 1.5 gal./sq. or adhered with Weatherking or Weatherking Plus WC applied at 2'/2 <br />gal./sq. <br />NOA No.: 24-1114.04 <br />Expiration Date: 12/02/29 <br />Approval Date: 12/19/24 <br />Page 32 of 39 <br />