ITB No 15-07-01 - CITYWIDE CUSTODIAL SERVICES (Final)

Home Browse Search

City of Sunny Isles Beach | Invitation to Bid No. 15‐07‐01 31 All floor surfaces to which stripper has been applied should be thoroughly rinsed with clean water. When a wet/dry vacuum is used, the area should be rinsed at least once after the stripping solution has been removed. If a mop is used to pick up the stripping solution, the area should be rinsed at least twice. B. Refinishing Refinishing should be defined as the proper application of at least two coats of finish to all areas. The finish should be applied with a clean, fine strand, rayon mop head. No finish, which has been removed from its original container, should be returned to that container. 4.13 CLEANING STAINLESS STEEL The cleaning of stainless steel surfaces shall be defined as the application of an approved stainless steel cleaner to the surface and its complete removal leaving the surface clean, dry, and as glossy as possible. The surface shall be free of smudges and streaks on completion of the project. Water or mild neutral detergent solution may be used to remove the film of stainless steel cleaner. The surface and adjacent surfaces should be left with no trace of cleaning material on them. Abrasive cleaners, pads, or brushes are forbidden in this project. Brushes with flexible nylon bristles may be used to remove traces of stainless steel cleaner from crevices and corners. Clean, lint-free cloths should be used for the application and removal of stainless steel cleaner. Moving machinery must be stopped for this project. 4.14 WASH FURNITURE Using a supply of cloths and sponges, a detergent solution, and a bucket, dust furniture to remove loose dry soil. To painted, vinyl and other washable surfaces, apply clean detergent solution in moderate amounts. Scrub spots where soil is stubborn. On surfaces that do not tear or scratch, a small amount of lotion cleanser may be used to remove stubborn soil. Wring cloths into a catch bucket. Use a clean cloth and rinse water to rinse the solution from furniture surfaces. Use a dry cloth to dry the surfaces. On completion of the project, furniture surfaces should be clean and dry. Manufacturer instructions and cautions are to be followed on all equipment and materials used. Replace furniture moved for the project. 4.15 CARPET CLEANING, WATER EXTRACTION METHOD Carpet cleaning, water extraction method shall be defined as the spot cleaning and vacuuming operation of the water extraction equipment, and re-vacuuming of all carpet in an area. All vacuuming, both before after the use of the water extraction equipment shall be done with a medium-duty pile lifter vacuum.