Specifications - Laserfiche WebLink

Home Browse Search

' Emergencies: 1 1 6.22 In emergencies affecting the safety of persons or the Work or property at the site or adjacent thereto, the CONTRACTOR, without special instruction or authorization from the CONSULTANT or CITY, is obligated to act, at their discretion, to prevent threatened damage, injury or loss. They will give the CONSULTANT prompt written notice of any significant changes in the Work or deviations from the Contract Documents caused thereby. If the CONTRACTOR believes that additional Work done by them in an emergency which arose from causes beyond their control entitles them to an increase in the Contract Price or an extension of the Contract Time, they may make a claim therefore as provided in articles 11 and 12. Shop Drawings and Samples: 6.23 After checking and verifying all field measurements, the CONTRACTOR will submit to the CONSULTANT for review, in accordance with the accepted schedule of shop drawing submissions six (6) copies (or at the CONSULTANT'S option, one reproducible copy) of all Shop Drawings, which shall have been checked by and stamped with the approval of the CONTRACTOR and identified as the CONSULTANT may require. The data shown on the Shop Drawings will be complete with respect to dimensions, design criteria, materials of construction and the like to enable the CONSULTANT to review the information as required. 6.24 The CONTRACTOR will also submit to the CONSULTANT for review, with such promptness as to cause no delay in Work, all samples required by the Contract Documents. All samples will have been checked by and stamped with the approval of the CONTRACTOR, identified clearly as to material, manufacturer, any pertinent catalog numbers and the use for which intended. 6.25 At the time of each submission, the CONTRACTOR will in writing call the CONSULTANT'S attention to any deviations that the Shop Drawings or sample may have from the requirements of the Contract Documents. 6.26 The CONSULTANT will review with responsible promptness Shop Drawings and Samples, but their review shall be only for conformance with the design concept of the Project and for compliance with the information given in the Contract Documents. The review of a separate item as such will not indicate review of the assembly in which the items functions. The CONTRACTOR will make any corrections required by the CONSULTANT and will return the required number of corrected copies of Shop Drawings and resubmit new samples until the review is satisfactory to the CONSULTANT. The CONTRACTOR shall direct specific attention in writing or on resubmitted Shop Drawings to revisions other than the corrections called for by the CONSULTANT on previous submissions. The CONTRACTOR'S stamp of approval on any Shop Drawings or sample shall constitute representation to the CITY and the CONSULTANT that the CONTRACTOR has either determined and verified all quantities, dimension, field construction criteria, materials, catalog numbers and similar data or they assume full responsibility for doing so, and that they have reviewed or coordinated each Shop Drawing to sample with the requirements of the Work and the Contract Documents. 6.27 No Work requiring a Shop Drawing or sample submission shall be commenced until the submission has been reviewed by the CONSULTANT. A copy of each Shop Drawing and each approved sample shall be kept in good order by the CONTRACTOR at the site and shall be available to the CONSULTANT. 6.28 The CONSULTANT'S review of Shop Drawings or samples shall not relieve the CONTRACTOR from their responsibility for any deviations from the requirements of the Contract Documents unless the CONTRACTOR has in writing called the CONSULTANT'S attention to each deviation at the time of submission and the CONSULTANT has given written approval to the specific deviation, nor shall any review by the CONSULTANT relieve the CONTRACTOR from responsibility for errors or omission in the Shop Drawings. Cleaning up : 00710-12