Specifications - Laserfiche WebLink

Home Browse Search

3.4. ALARM REPORTING A. Duress buttons shall report to lobby monitoring station and Police dispatch area. B. Door closure switches shall report to lobby monitoring station and Police dispatch area. C. Public Duress Call Stations "PUSH FOR HELP" button shall report to community E -911 and Police dispatch. Public Duress Call Station, "INFO" button shall initiate a voice call to the lobby monitoring station. 3.5. ADDITIONAL SYSTEM PROGRAMMING NOTES A. Provide fully functional and programmed system(s) to Owner's requirements. 3.6. WIRING INSTALLATION A. The Security system Installer shall insure that connections to locks, door switches, control panels and consoles are complete and properly terminated. B. All conductors shall meet or exceed manufacturer's minimum wire size for device, application, and length of run, and shall be installed in common raceways and equipment enclosures with other conductors. C. Wiring systems shall use stranded copper conductors. D. Wiring systems shall be individually color- coded. All colors shall be continuous from filed device to last internal termination point. Colors shall be consistent as to function, i.e., Red -24VDC positive, Black -24VDC negative. White or grey conductors shall be used only for neutral conductors and green only for grounding conductors. E. Conductors within junction and pull boxes and equipment enclosures shall be grouped and laced with nylon tie straps with identification tab, in individual sets serving individual locksets or operating mechanisms. Conductor groups shall be identified on the strap tab with respect to room or operator served. F. Security system conductors shall not be spliced; conductors shall be continuous between locksets and /or operators and terminations point for control. G. Junction boxes and pull boxes required for installation of the security system wiring must be installed to be fully accessible. Work under this section of the specification must be closely coordinated with work of all other trades to comply with this requirement. 3.7. EQUIPMENT INSTALLATION A. Hardware, screws, bolts, nuts, components and accessory fittings shall be of a type designed, intended or appropriate for the use, ad complement the items which they are used, and shall have corrosion protection suitable for the atmosphere in which they are installed. B. Equipment, except portable equipment, shall be held firmly in place. This shall include amplifiers, cameras, monitors, cables. Etc. Fastening and supports shall be adequate to support their loads with a safety factor of at least five. Switches, connectors, outlets, etc., shall be clearly, logically and permanently labeled during installation. 8/04 17720 -8