|
2. Immediately on delivery, inspect shipments to assure compliance with
<br />requirements of Contract Documents and approved submittals, and that Products
<br />are properly protected and undamaged.
<br />B. Provide equipment and personnel to handle Products by methods to prevent soiling or
<br />' damage to Products or packaging.
<br />1.06 STORAGE AND PROTECTION
<br />C. All materials and equipment to be incorporated in the work shall be handled and stored by
<br />the Contractor before, during, and after shipment in a manner to prevent warping,
<br />twisting, bending, breaking, chipping, rusting, and any injury, theft or damage of any kind
<br />' whatsoever to the material or equipment.
<br />D. Cement, sand and lime shall be stored under a roof and off the ground and shall be kept
<br />completely dry at all times. All structural and miscellaneous steel, and reinforcing steel
<br />shall be stored off the ground or otherwise to prevent accumulations of dirt or grease, and
<br />to minimize rusting. Brick, block and similar masonry products shall be handled and
<br />' stored in a manner to reduce breakage, chipping, cracking, and spalling to a minimum.
<br />1 06/05 01600 -3 03- 4138.13
<br />A. The Contractor shall furnish a covered, weather protected storage structure providing a
<br />clean, dry, non - corrosive environment for all mechanical equipment, valves, electrical and
<br />instrumentation equipment, and special equipment to be incorporated into this project.
<br />'
<br />Storage of equipment shall be performed to allow easy access and be in strict accordance
<br />with the "instructions for storage" of each equipment supplier and manufacturer including
<br />weather/humidity protection, connection of heaters, placing of storage lubricants in
<br />equipment, blocking, or skid storage, etc. Corroded, damaged or deteriorated equipment
<br />and parts shall be replaced before acceptance of the project. Equipment and materials not
<br />properly stored will not be included in a payment estimate.
<br />B. Store Products in accordance with manufacturer's instructions, with seals and labels intact
<br />and legible.
<br />'
<br />1. Store products subject to damage by the elements in weather -tight enclosures.
<br />2. Maintain temperature and humidity within the ranges required by manufacturer's
<br />instructions.
<br />'
<br />3. Store fabricated products above the ground on blocking or skids, prevent soiling
<br />or staining. Cover products which are subject to deterioration with impervious
<br />sheet coverings, provide adequate ventilation to avoid condensation.
<br />'
<br />4. Store loose granular materials in a well drained area on solid surfaces to prevent
<br />mixing with foreign matter.
<br />5. All unlabeled or improperly labeled materials shall be removed from the project
<br />site.
<br />C. All materials and equipment to be incorporated in the work shall be handled and stored by
<br />the Contractor before, during, and after shipment in a manner to prevent warping,
<br />twisting, bending, breaking, chipping, rusting, and any injury, theft or damage of any kind
<br />' whatsoever to the material or equipment.
<br />D. Cement, sand and lime shall be stored under a roof and off the ground and shall be kept
<br />completely dry at all times. All structural and miscellaneous steel, and reinforcing steel
<br />shall be stored off the ground or otherwise to prevent accumulations of dirt or grease, and
<br />to minimize rusting. Brick, block and similar masonry products shall be handled and
<br />' stored in a manner to reduce breakage, chipping, cracking, and spalling to a minimum.
<br />1 06/05 01600 -3 03- 4138.13
<br />
|