Laserfiche WebLink
3.02 PREPARATION <br />A. Provide adequate temporary support as necessary to assure structural value or integrity of <br />affected portion of Work. <br />B. Provide devices and methods to protect other portions of Project from damage. <br />C. Provide protection from elements for that portion of the project that may be exposed by <br />cutting and patching work, and maintain excavations free from water. <br />3.03 PERFORMANCE <br />A. Execute cutting and demolition by methods that will prevent damage to other work, and <br />will provide proper surfaces to receive installation of repairs. <br />B. Execute excavating and backfilling by methods that will prevent settlement or damage to <br />other work. <br />C. Employ original Installer or Fabricator to perform cutting and patching for: <br />1. Weather- exposed or moisture- resistant surfaces. <br />2. Sight - exposed finished surfaces. <br />D. Execute fitting and adjustment of products to provide a finished installation to comply <br />with specified products, functions, tolerances and finishes. <br />E. Restore work that has been cut or removed; install new products to provide completed <br />Work in accord with requirements of Contract Documents. <br />F. Fit work airtight to pipes, sleeves, ducts, conduit and other penetrations through surfaces. <br />G. Refinish entire surfaces as necessary to provide an even finish to match adjacent finishes: <br />1. For continuous surfaces, refinish to nearest intersection. <br />2. For an assembly, refinish entire unit. <br />END OF SECTION <br />06/05 01045 -3 03- 4138.B <br />