Laserfiche WebLink
3. A minimum of two samples of each item shall be submitted. <br />C. Each sample shall have a label indicating <br />1. Name of Project <br />2. Name of Contractor and Subcontractor <br />3. Material or Equipment Represented <br />4. Place of Origin <br />5. Name of Producer and Brand (if any) <br />6. Location in Project <br />(Samples of finished materials shall have additional marking that will <br />identify them under the finished schedules.) <br />D. The Contractor shall prepare a transmittal letter in triplicate for each <br />shipment of samples containing the information required in subparagraph <br />1.07B above. He shall enclose a copy of this letter with the shipment and <br />send a copy of this letter to the Engineer. Approval of a sample shall be <br />only for the characteristics or use named in such approval and shall not <br />be construed to change or modify any Contract requirements. <br />E. Approved samples not destroyed in testing shall be sent to the Engineer <br />or stored at the site of the work. Approved samples of the hardware in <br />good condition will be marked for identification and may be used in the <br />work. Materials and equipment incorporated in work shall match the <br />approved samples. Samples which failed testing or were not approved <br />samples will be returned to the Contractor at his expense, if so requested <br />at time of submission. <br />PART 2 - PRODUCTS (Not Used) <br />PART 3 - EXECUTION (Not Used) <br />END OF SECTION <br />06/06 01340 -7 03- 4138.0 <br />