Specifications - Laserfiche WebLink

Home Browse Search

2. Maintain temperature and humidity within the ranges required by manufacturer's instructions. 06/06 01600 -4 03-4138.0 I 3. Store fabricated products above the ground on blocking or skids, Cement, sand and lime shall be stored under a roof and off the ground prevent soiling or staining. Cover products which are subject to deterioration with impervious sheet coverings, provide adequate ventilation to avoid condensation. miscellaneous steel, and reinforcing steel shall be stored off the ground or 4. Store loose granular materials in a well drained area on solid surfaces to prevent mixing with foreign matter. 5. All unlabeled or improperly labeled materials shall be removed from stored in a manner to reduce breakage, chipping, cracking, and spalling to the project site. C. All materials and equipment to be incorporated in the work shall be handled and stored by the Contractor before, during, and after shipment Moving parts shall be rotated a minimum of once weekly to insure proper in a manner to prevent warping, twisting, bending, breaking, chipping, rusting, and any injury, theft or damage of any kind whatsoever to the material or equipment. 06/06 01600 -4 03-4138.0 I D. Cement, sand and lime shall be stored under a roof and off the ground and shall be kept completely dry at all times. All structural and miscellaneous steel, and reinforcing steel shall be stored off the ground or otherwise to prevent accumulations of dirt or grease, and to minimize rusting. Brick, block and similar masonry products shall be handled and stored in a manner to reduce breakage, chipping, cracking, and spalling to a minimum. E. Moving parts shall be rotated a minimum of once weekly to insure proper lubrications and to avoid metal -to -metal "welding ". Upon installation of the equipment, the Contractor shall start the equipment, at least half load, once weekly for an adequate period of time to insure that the equipment does not deteriorate from lack of use. F. All materials which, in the opinion of the Engineer, have become so damaged as to be unfit for the use intended or specified shall be promptly removed from the site of the work, and the Contractor shall receive no compensation for the damaged material or its removal. G. Arrange storage in a manner to provide easy access for inspection. Make periodic inspections of stored Products to assure that Products are maintained under specific conditions, and free from damage or deterioration. 06/06 01600 -4 03-4138.0 I