Specifications - Laserfiche WebLink

Home Browse Search

Hammer the grout into the hole until dense, and an excess of paste appears on the surface in the form of a spider web. Trowel smooth with heavy pressure. Avoid burnishing. D. Rub lightly with a fine carborundum stone at an age of I to 5 days if necessary to bring the surface down with the parent concrete. Exercise care to avoid damaging or straining the virgin skin of the surrounding parent concrete. Wash thoroughly to remove all rubbed matter. G. In cases where the Embeco is employed in multiple patches and a rusty finish is not desired on the surface, such as exposed faces of walls, etc., the final layer (or at least the final 1/2 inch) shall be composed of the 1 1.5 grout without Embeco. After hardening, rub lightly as described above for form tie holes. December 2006 03300 -16 06 -5723 E. Defective concrete and honeycombed areas shall be chipped reasonably square and at least 1 inch deep to sound concrete by means of hand chisels or pneumatic chipping hammers. Irregular voids or surface stones need not be removed if they are sound, free of laitance, and firmly embedded in the parent concrete, subject to Engineer's final inspection. If honeycomb exists around reinforcement, chip to provide a clear space at ' least 3/8 inch wide all around the steel. For areas less than 1 1/2 inch deep, the patch may be made in the same manner as described above for r(nontrowelable) filling for tie holes, care being exercised to use adequately dry mixtures and to avoid sagging. Thick repairs will require build -up in successive 1 1/2 inch layers on successive days, each layer being applied (with slurry, etc.) as described above. To aid strength and bonding of the multiple layer repairs, the Engineer may order the use of Embeco non - shrink, metallic aggregate by the Master Builders Company, ' Cleveland, OH or Ironite by Fox Industries, Madison IL as an additive as follows.. Material Volumes Weights Cement 1.0 1.0 Embeco 0.15 0.25 ' Sand 1.5 1.5 F. For very heavy (generally formed) patches; the Engineer may order the addition of pea gravel to the mixture and the proportions modified as follows.. ' Material Volumes Weights Cement 1.0 1.0 Embeco 0.2 0.33 Sand 1.0 1.0 Pea Gravel 1.5 1.5 G. In cases where the Embeco is employed in multiple patches and a rusty finish is not desired on the surface, such as exposed faces of walls, etc., the final layer (or at least the final 1/2 inch) shall be composed of the 1 1.5 grout without Embeco. After hardening, rub lightly as described above for form tie holes. December 2006 03300 -16 06 -5723