Specifications - Laserfiche WebLink

Home Browse Search

2.13 COMPLIANCE WITH FEDERAL STANDARDS All items to be purchased under this contract shall be in accordance with all governmental standards, to include, but not be limited to, those issued by the Occupational Safety and Health Administration (OSHA), the National Institute of Occupational Safety Hazards (NIOSH), and the National Fire Protection Association (NFPA). 2.14 ACCIDENT PREVENTION AND BARRICADES Precautions shall be exercised at all times for the protection of persons and property. All bidders performing services under this contract shall conform to all relevant OSHA, State and City regulations during the course of such effort. Any fines levied by the above mentioned authorities for failure to comply with these requirements shall be borne solely by the responsible bidder. Barricades shall be provided by the bidder when work is performed in areas traversed by persons, or when deemed necessary by the City Project Manager. 2.15 LICENSES, PERMITS AND FEES The bidder shall obtain and pay for all licenses, permits and inspection fees required for this project; and shall comply with all laws, ordinances, regulations and building code requirements applicable to the work contemplated herein. Damages, penalties and or fines imposed on the City or the bidder for failure to obtain required licenses, permits or fines shall be borne by the bidder. 2.16 DEFICIENCIES IN WORK TO BE CORRECTED BY THE BIDDER The bidder shall promptly correct all apparent and latent deficiencies and/or defects in work, and/or any work that fails to conform to the contract documents regardless of project completion status. All corrections shall be made within 5 calendar days after such rejected defects, deficiencies, and/or non-conformances are verbally reported to the bidder by the City's project administrator, who may confirm all such verbal reports in writing. The bidder shall bear all costs of correcting such rejected work. If the bidder fails to correct the work within the period specified, the City may, at its discretion, notify the bidder, in writing, that the bidder is subject to contractual default provisions if the corrections are not completed to the satisfaction of the City within 5 calendar days of receipt of the notice. If the bidder fails to correct the work within the period specified in the notice, the City shall place the bidder in default. 2.17 LABOR, MATERIALS, AND EOUIPMENT SHALL BE SUPPLIED BY THE BIDDER Unless otherwise provided in Section 3 (entitled "Technical Specifications"), of this solicitation the bidder shall furnish all labor, material and equipment necessary for satisfactory contract performance. When not specifically identified in the technical specifications, such materials and equipment shall be of a suitable type and grade for the purpose. All material, workmanship, and equipment shall be subject to the inspection and approval of the City's Project Manager. 2.18 WORK ACCEPTANCE This project will be inspected by an authorized representative of the City. This inspection shall be performed to determine acceptance of work, appropriate invoicing, and warranty conditions. 2.19 AVAILABILITY OF CONTRACT TO OTHER GOVERNMENT AGENCIES PAGE 19 OF 28 BID No. 11-01-01