Reso 2012-1962 - Laserfiche WebLink

Home Browse Search

BID sFY IM-2008402 CITY OF HALLANDALE BEACH PAGE la OF35 FLORIDA SPECIFICATIONS THIS IS NOT AN ORDER Flying Cross Item: 87R7886Z MEWS SHIRT SPECIFICATIONS Fabric: ;, S Content 100% Textured Polyester conforming to the following specifications: Weioht: 7.5 oz/ Linear. yd. Coffin: 87 warp X 49 flNkV yams per sq. inch Tear Warp 6.6 lbs. Filling 8.5 lbs. Stmnaft Tensile: Warp 159 lbs. Filling 155 lbs. Color: LAPQBlue matching standard sample on display. Milliken style 707430, Color 7568. Style: Plain front coat style with fuQ-length tali, fonn- fitting, convertible collar, short sleeves. Two pleated breast pockets with scalloped naps. Shoulder straps. Full badge reinforcement. Matching inside Croke and banana bard of high lustre Poly Twill. Collar: Convertible collar shall be one piece and measure 3114" long at points with fused in Mylar stays. Topstitched 114" off the edge. Collar to be interlined with *250 Dacron. Front: Each front shall have a facing 3" in width. The left front shall have a top enter 1 %" wide with two rows of stitches 718" apart. Stitching on top center is not to be visible on the tum -back facing. The shirt will have 7 buttons and buttonholes on the front spacing between each will be 3 314" exoW the spacing between the neck button and the first button on the front, which will be 2 1/2 ". Top comer intaik" with #P250 Dacron. The fronts shall be joined to the yoke so that both raw edges of the yoke are turned under, with the front sandwiched between, and than all throe are stitched down with a 1/16" raised stitch. Safety stitch Joining unacceptable. A 15" nylon zipper, to be set below the second button and buttonhole shall accomplish front closure. The bop, second and bottom buttons to be attached to the right front, the balance to be sewn over the buttonholes on the left front. Shoulder Straps: Style and dimensions as sample. Asymmetrical shape topstitched 114" off the edge to be set on yoke with leading topstitches conbrming with front joining seam. To measure 2" at sleeve tapering to 1 318" and set not more than 112" from folded collar. Cross-stitched approximately 2" from sleeve seam. Creased and edge stitched shoulder strap construction unacceptable.