Reso 2012-1962 - Laserfiche WebLink

Home Browse Search

BID SEY-2005-M-002 CITY OF HALLANDALE (BEACH PAGE is OF35 FLORIDA SPECIFICATIONS THIS IS NOT AN ORDER Badge Reinforcement: Two-ply sling 1" wide centered over left pocket and stitched to shoulder seam and flap setting stitch. To have 2 buttonhole eyelets approximately 1 1/4" from top of pocket Nap spaced 11/40 apart and centered on sling. Pockets: Two breast pockets with 1 %" stitched pleats and mitered comers. Pocket to measure 5 5/8" wide, 6" deep. Left breast pocket to have 11/2" pencil stitch. Each pocket to have Velcro tape 3/." long by 1/2" wide positioned on both edges of pocket to correspond with outer scalloped flap points as sample. Flaps: Deep scalloped design to measure 5 7/8" across and 2 3/4" in depth at center point, 21/4" at sides. Secured to shirtfront approximately 1/4" above pocket. Topstitched 1/4" off the edge. Left flap to have invisible pencil opening 11/2" to correspond precisely with penal slot of pocket. Both flaps to be Interlined with #250 Dacron. Button sewn on top of flap buttonhole. Creased and edge stitched pocket flap construction unacceptable. Under side of the flap to have Velcro tape 314" long by 1/2" wide, positioned on outer points of both pocket flaps as sample. Sleeves: Sleeves are to be straight and whole, to have 3/4" hem and to finish approximately 9" long from shoulder seams. Buttons: First grade 194igne peariescent plastic to match. Sewing: Single needle throughout. All topstitched 1/4" off the edge. Sleeve inserting and side dose felling safety stitched. Thread: All sewing threads to be fast color polyester core polyester wrap to match Interlining: Collars, pocket flaps and top center to be interlined with 5250 Dacron. Military Creases: 5 stitched -in sharp military creases on all shirts. One crease on each front to be centered vertically. No creases through pockets or flaps. Spacing for military creases on shirt back to be proportionate to the size of the shirt as follows: sizes 14 through 15 1/2 - creases to be 4 314" apart; sizes 18 through 18 inclusive — creases to be 5 3/8" apart as measured from the center crease. Construction: Collars and flaps are made by the conventional construction. Top ply, bottom ply and interlining are first stitched together, then turned rightside out and finally topstitched. Convertibility: This garment shall be designed to accommodate removable metal buttons having eyelets under the sewn buttons on the shoulders, pockets and button front. Protective pieces shall be sewn on the inside of the garment on the shoulders and on the inside of the right front. Country of All raw materials and assembly thereof made in the U.S.A. Manufacture: