Reso 2012-1962 - Laserfiche WebLink

Home Browse Search

BID 0FY 2006 - 2006-002 CITY OF HALLANDALE BEACH PAGE 17 OF35 SPECIFICATIONS THIS N NOT AN ORDER Flying Cross Item: 127R7886Z LADIES-SHIRT SPECIFICATIONS, SLEEVE Fabric: 100% Textured Polyester conforming to the following specifications: Weight 7.5 oz./ Linear. yd. Cons uftn: 87 warp X 49 flNing yams per sq. inch Tear Warp 6.6 lbs. Filling 8.5 lbs. abogth: Tensile: Warp 159 lbs. Filling 155 lbs. Color: LAPD Blue matching standard sample on display. NMNken style 707430, Color 7586. Style: Plain front coat style with full - length to#, form - fitting, convertible coUr, long sleeves with barrel cuffs. Two pleated breast pockets with scalloped flaps. Shoulder straps. Full badge rehifon ement. Matching inside yoke and banana band of high lustre Poly Twill. Collar: Convertible collar shall be one piece and measure 2 7/8' long at points with fused in Mylar stays. Topstitched 1/40 off the edge. Collar to be interffned with #250 Dacron. Front: Each front shall have a facing 3" in width. The right front shall have a top center 1 W wide with two rows of stitches 7/8" apart. Stitching on top center is not to be visible on the tum -back facing. The shirt will have 6 buttons and buttonholes on the front; spacing between each will be 3 W except the spacing between the neck button and the first button on the front, which will be 21/2". Top center interlined with #250 Dacron. The fronts shall be joined to the yoke so that both raw edges of the yoke are turned under, with the front sandwiched between, and then all three are stitched down with a 4/18" raised stitch. Safety stitch joining unacceptable. An 11 W nylon zipper, to be set below the second button and buttonhole shall accompltah front closure. The top, second and bottom buttons to be attached to the left front, the balance to be sewn over the buttonholes on the right front. Shoulder Style and dimensions as sample. Asymmetrical shape topstitched 1/4' off the Straps: edge to be set on yoke with leading topstitches conforming with front joining seam. To measure 2" at sleeve tapering to 13/8" and set not more than 1/2" from folded collar. Crosw4dtched approximately 2" from shave seam. Creased and edge stitched shoulder strap construction unacceptable. Badge Two -ply sling 1" wide centered over left pocket and stitched to shoukter seam Reinforcement: and flap setting stitch. To have 2 buttonhole eyelets approximately 7/8" from top of pocket flap spaced 7/8" apart and centered on sling.