Reso 2012-1962 - Laserfiche WebLink

Home Browse Search

BID OFY 2006- 2006.002 CITY OF HALiANDALE BEACH PAGE 18 OF35 FLORIDA SPECIFICATIONS THIS te NOT AN ORDER Pockets: Two breast pockets with i %' stitched puts and mitered comers. Pocket to measure 5" wide X 5" deep. Each pocket to have Velcro tape 314" long by 1/2- wide positioned on both edges of pocket to correspond with outer scalloped flap points as sample. Flaps: Deep scalloped design to measure 5 y° across and 2 Y40 In depth at center point, 1 VV at sides. Secured to shirtfront approximately 1/4' above pocket. Topstitched 1/4" off the edge. Left flap to have invisible pencil opening 1 Me'. Both flaps to be Wdentined with 0250 Dacron. Button sewn on top of flap buttonhole. Creased and edge stitched pocket flap construction unacceptable. Under side of the Hap to have Velcro tape 3/4" long by 1/211 wide, positioned on outer points of both pocket flaps as sample. Sleeves: Straight at width - no bias - of one piece shaped at head, jacket type. Sleeve vent approximately 4 314" long with top and bottom facings. Top facing to measure 1 118" wide point blocked at top. Uriderfacing 112" wide. Culls: To measure 2 1/2" in depth with rounded comers as sample. Topstitched 1/4" off the edge with two button adjustable cuff. Both wfts to be intedined with #250 Dacron. Buttons: First grade 19 -ligne peariescent plastic to match. Sewing: Single needle throughout. All topstitched 1/4" off the edge. Sleeve inserting and side dose felling safety stitched. Thread: All sewing threads to be fast color polyester core polyester wrap to match Interlining: Collars, packet flaps, top center and cuffs to be Interlined with Dacron #250. MNNary Creases: 5 stitched -in sharp military creases on all shirts. One crease on each front to be centered verfically. No crosses through pockets or flaps. Spacing for military creases on shirt back to be proportionate to the size of the shirt. Construction: Collars and flaps are made by the conventional contrition. Top ply, bottom ply and interlining are first stitched together, then turned rightside out and finally topstitched. Convertibility: This garment shall be designed to accommodate removable metal buttons having eyelets under the sewn buttons on the shoulders, pockets, cuffs and button front Protective pieces shall be sewn on the inside of the garment on the shoulders, cuffs and on the Inside of the button front. Country of All raw materials and assembly thereof made in the U.S.A. Manuhcbme: Sizes available: Available in bust sizes 30 through 48, sleeve length of Long