Reso 2012-1962 - Laserfiche WebLink

Home Browse Search

BID OFY 2005- 2006402 CITY OF HALLANDALE BEACH PAGE 19 OF35 SPECIFICATIONS THIS 18 NOT AN ORDER Flying Cross Item: 177R7886Z LADIES SHIRT SPEC1ICATIONS — SHORT SLR Fabric: Content: 100% Textured Polyester conforming to the following specifications: Weight: 7.5 oz./ Linear. yd. n 67 warp X 49 filling yams per sq. inch n: Tear Warp 6.6 lbs. Filling 8.5 lbs. Strength Tensile: Warp 159 lbs. FiMrg 155 lbs. Color: LAPD Blue matching standard sample on display. Milliken style 707430, Color 7568. Style: Plain front coat style with full-length tail, fom-fitting, convertible collar, short sleeves. Two pleated breast pockets with walloped flops. Shoulder straps. Full badge reinforcement. Matching inside yoke and banana band of high lustre Poly Twill. Collar: Convertible collar shall be one piece and measure 2 7/8" long at points with fused in Myler stays. Topstitched 114" off the edge. Collar to be inWned with #250 Dacron. Front: Each front shall have a fackV 3" in width. The right front shall have a top center 1 W' wide with two rows of stitches 7/8" apart. Stitching on top center Is not to be visible on the tum -bad* facing. The shirt will have 6 buttons and buttonholes on the front; spacing between each will be 3 W except the spacing between the neck button and the first button on the front, which will be 21/2". Top center inter fined with #250 Dacron. The fronts shall be joined to the yoke so that both new edges of the yoke are turned under, with the front sandwiched between, and then all three are stitched down with a 1/16" raised stitch. Safety stitch joining unacxate. An 11 r4" nylon ripper, to be set below the second button and buttonhole shall accomplish front closure. The top, second and bottom buttons to be attached to the left front, the balance to be sewn over the buttonholes on the right front Shoulder Style and dimensions as sample. Asymmebicsai shape topstitched 114" off the Straps: edge to be set on yoke with leading topstitches conforming with front joining seam. To measure 2" at sleeve tapering to 13/x' and set not more than 11r from folded collar. Cross - stitched approximately 2" from sleeve seam. Creased and edge stitched shoulder strap construction unacceptable.