Reso 2012-1962 - Laserfiche WebLink

Home Browse Search

BID #U ZQQL&MM2 CITY OF HALLANDALE BEACH PAGE 24 OF35 FLORIDA SPECIFICATIONS THIS 18 NOT AN ORDER Slack shall be manufactured from a women's uniform trouser pattern with a plain front and one dart on each rear panel above the hip pockets. Slack shall be straight leg design. The slack 9M incorporate two quarter top front pockets and two hip pockets. PQQMNG: The pocketing shall be 70% Polyester / 30% Cotton, 2.9 oz. per square yard (80" width) with a minimum 78 X 84 count. PodM% must have a durable press finish and the color of the pocketing must be black. PQM WJ The two (2) front pockets will be quarter top style with a minimum opening of 8" and a minimum depth of 5 3/4" measured from the bottom of the opening. Front pockets to have *Wgtd bartadks (use of triangle bartadks will be cause for rejection) at the top and bottom of pocket openings. Pockets shall be cormtr a fed using the stitch, turn, and topsdtch method. Pocket hangs to be made of the basic fabric and must measure a minimum of 3" in width at the top. The two (2) hip pockets shall have a minimum opening of 5 112" and a mirtlmurn depth of 5 3/4" measured from the bottom of the pocket opening. Hip pockets shall be constructed using the double welt method on a REECE PW NtachMe. The welts shall be finished in such a manner that there Is no topstitching (topstitched hip pocket wefts shall be cause for rejection). The comers of the hip pocket openings shall have firm straight bartacks for reinforcement (triangle bartadks are unacceptable). Hip pocket facings to be made of basic fabric and have a minimum depth of 3/40. The left hip pocket shall have a centered tab made of basic cloth inserted into the top weft with barlacks at the top and bottom of the tab to form an opening for a button. A button shall be located below the bottom welt corresponding in location with the tab. The trouser will be made with the Freedom Fit® wafstbarxt system, which is designed to provide the wearer with a more confortabie and better fitting trouser. The waistband shall be constructed using the "dosed method" and shall measure 2" wide when finished. The waistband closure shall be accomplished with a crush proof hook and eye. The hook and eye shall be reinforced with stays made of a non -woven fabric that are anchored by the topstitching for the fly facing and curtain. This topstitching must be to the top of the waistband. The waistband must be topstitched 1/18" below the waistband seam for added strength. The top portion of the inside of the waistband Is to consist of the same fabric as used for pocketing (70% polyester 30% cotton - minimum 80 X 82 ( +/ -) 2 count). The fabric Is to be cut on the bias for maximum comfort. To be 17/8' wide and to finish 1 1/8" wide after construction. Upper waistband curtain to be inner lined with stretch Son-Rol canvas. This canvas fabric consists of a warp of 47 ends of text urized nylon and a fill of 34 ends of 750 denier polyester monofilament. The woven fabric is coated with latex, which completely encapsulates all yams. This finish canvas fabric weighs 12.0 oz/yd'. The canvas will be cut 1 1/2" wide with the monofilaments running vertically and have a 10% stretch.