Reso 2012-1962 - Laserfiche WebLink

Home Browse Search

BID #BEY 2605-2006 -002 CITY OF HALLANDALE BEACH PAGE 25 OF35 FLORIDA SPECIFICATIONS THIS 0 NOT AN ORDER The bottom portion of the waistband curtain will be a blend of 32% nylon, 38% polyester, 18% rubber (3 strands) 11 % lycra and I% acrylic woven 1 7ff wide and to finish 1 318" wide. To have a minimum of 40% stretch characteristics. Note: In a performance sketch waistband, the upper and lower portion of the band will perform different functions. The upper portion should slow a comfort fit at the waist when bending or sitting, and must maintain a crisp, dean appearance at the outer waistband. This part of the band will stretch 10% and be firm enough to prevent waistband rollover. The bottom portion of the waistband stretches over the hip to give support to the lower back and abdomen. In addition, this high stretch portion of the band should constantly be pressed up by the Dips, preventing the slack from slipping down while being wom, even if heavy keys, change, or other items are carried in the pockets or on the belt The three (3) rubberized strands ensure that shirts stay tucked In for neat appearance. Trouser shall have a metal memory lock zipper. There shall be a French Fly tab closure on the inside of the right fly. The tab shall be double ply made of the basic cloth (tabs made of pocketing material or a "grown on" French Fly will be cause for rejection). The right fly shall be lined with the some fabric as the waistband curtain and pocketing. The fly lining shah be sewn to the left fly below the zipper in a neat and durable manner. A button shall be located on the left fly corresponding with ttre French Fly tab to provide a dean and comfortable closure. There shall be a firm straight bartack at the bottorn of the fty going through the zipper tape. There shall be a minimum of seven belt loops 314" in width of double thickness. Each loop must have a non -woven Interlining. All loops (except for the back center loop) must be sewn iMo the bottom of the waistband ( "dropped" belt loops are cause for rejection) and the top of the belt loops shall be caught into the waistband curtain seam with a Rocap machine. The bottom of the center back loop shall be tacked to the trouser and the top of the bop tacked to the outside of the waistband. Seat outlet to measure a minimum of 2 314" to allow for alterations. Seat must be sewn with a Tandem Needle Machine. Trouser must be stitched with matching thread and all stitching to show must be 10-11 stitches per inch.Trouser must be neatly pressed on Hothead Presses and properly shaped. Outmms and inseams must be pressed open. Trouser must be cleaned and finished to eliminate boss threads.