Laserfiche WebLink
ends and shall provide a method of applying "skip" lines. <br /> <br />b. The use of pans, aprons, or similar appliances which the die overruns will <br />not be permitted. <br /> <br />7. Glass spheres applied to the surface of the completed stripe shall be applied <br />by an automatic bead dispenser attached to the striping machine in such a <br />manner that the beads are dispensed almost instantaneously upon the <br />installed line. <br /> <br />8. Special kettle(s) shall be provided for melting and heating the thermoplastic <br />material. <br /> <br />a. The kettle(s) shall be equipped with automatic thermostatic control <br />devices in order to provide uniform temperature control and prevent <br />overheating of the material. <br /> <br />b. The applicator and kettle(s) must be so equipped and arranged as to <br />satisfy the requirements of the National Fire Underwriters, and the State <br />of Florida. <br /> <br />9. Applicators shall be mobile and maneuverable to the extent that straight <br />lines can be followed and normal curves can be made in a true arc. <br /> <br />a. The applicator equipment to be used on roadway installations shall <br />consist of either hand equipment or truck mounted units depending on <br />the type of marking required. <br /> <br />10. The hand applicator equipment shall be insulated and shall have sufficient <br />capacity to hold 150 pounds of molten material and shall be sufficiently <br />maneuverable to install crosswalks; lane, edge and center lines; arrows and <br />legends. <br /> <br />a. The truck mounted unit for lane, edge, and center lines shall consist of a <br />mobile self contained unit carrying its own material capable of operating <br />at a minimum speed of five miles per hour while installing striping. <br /> <br />11. Application time, weather limitations and surface preparation shall be in <br />accordance with D.O.T. Specifications, Sections 710-4, 710-5 and 710-8. <br /> <br />12. The material, when formed into traffic stripes or other markings must be <br />readily renewable by placing an overlay of new material directly over an old <br />line of compatible material in such a manner that no splitting or separation <br />takes place. <br /> <br />13. The application temperature shall be within the range specified by the <br />manufacturer of the thermoplastic compound being used. <br /> <br />City of Sunny Isles Beach <br />NE 174th Street Roadway Improvements <br />02743 - 12 Bituminous Concrete Pavement <br />14-1758 / 09-19-2014 <br />