Laserfiche WebLink
14. All pavement edge lines, gore, island and diagonal strip markings, bike lane <br />symbols and messages, wherever located, shall have a minimum thickness <br />of 0.060 inch at the edges and a maximum thickness of 0.120 inch at the <br />center. <br /> <br />a. A minimum average film thickness of 0.060 inch shall be maintained. <br /> <br />b. Lane lines, center lines, transverse markings (except shoulder markings), <br />and pavement markings within traffic wearing area (such as dotted <br />turning guide lines) shall have a minimum thickness of 0.090 inch at the <br />edges and a maximum thickness of 0.188 inch at the center. <br /> <br />c. A minimum average film thickness of 0.090 shall be maintained. <br /> <br />d. Thickness measurements shall be an average in over a three foot length. <br /> <br />15. The glass sphere top coating shall be applied by a type of glass sphere <br />dispenser or gun which will embed the spheres into the line surface to at <br />least one-half their diameter. <br /> <br />a. The glass sphere top coating shall not incur more than a 10 percent loss <br />during the first 30 days of traffic exposure. <br /> <br /> <br />END OF SECTION <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />City of Sunny Isles Beach <br />NE 174th Street Roadway Improvements <br />02743 - 13 Bituminous Concrete Pavement <br />14-1758 / 09-19-2014 <br />