Laserfiche WebLink
2.04 EXPANSION MATERIALS <br /> <br />A. Pre-molded joint fillers shall conform to ASTM D544 Type V, equal to Celete 2 <br />"Flexcell", 1/2 inch thick (or as shown in the Drawings) by width as indicated in <br />the details. <br /> <br />B. Poured in place shall conform to ASTM D1190-52T, equal to Servicized <br />Products Corp., hot poured "paraplastic." <br /> <br />2.05 SLEEVES, HANGERS AND INSERTS <br /> <br />A. Inserts, hangers, sleeves, anchors, ties, bolts, dowels, thimbles, nailers, ground, <br />or other devices required for the attachment or passage of other work shall be <br />located by the CONTRACTOR from the Drawings in confirmation with the shop <br />drawings or as approved by the ENGINEER. <br /> <br />B. BOLTS <br /> <br />1. Install stainless steel bolts of size and length specified as indicated in the <br />Drawings. <br /> <br />2. Use 3/4-inch minimum size, with washers on both ends, where not indicated. <br /> <br />C. CHASES <br /> <br />1. Form chases with wood or metal forms or sleeves. <br /> <br />2. Remove wood. <br /> <br />3. Provide galvanized metal sleeves, if sleeves will not be removed. <br /> <br />4. Provide cast iron caulking sleeves where plumbing sleeves passes through <br />exterior walls, slabs, or foundations. <br /> <br />D. OTHERS <br /> <br />1. Anchor bolts, reglets, and inserts shall be of type, size, and spacing as <br />required by the trades involved. <br /> <br />2. Use stainless steel on submerged applications and/or where corrosive <br />environments exist as determined by the ENGINEER. <br /> <br />2.06 CURING COMPOUNDS <br /> <br />A. Do not use compound which will interfere with adhesion or cause other <br />deleterious reaction with indicated finish. <br /> <br /> <br />City of Sunny Isles Beach <br />NE 174th Street Roadway Improvements <br />03300 - 4 Cast-in-Place Concrete <br />14-1758 / 09-19-2014 <br />