Laserfiche WebLink
M. Provide ceramic epoxy lining for Sanitary Sewer Force main ductile-iron pipe <br />and fittings in conform with Method A of ASTM E-96-66, Procedure A, ASTM <br />D714-56, ASTM D 2794, and ASTM G 53-77. <br /> <br />1. The interior of the pipe shall receive 40 mils dry film thickness of the <br />protective ceramic epoxy lining. <br /> <br />2. The lining shall not be applied in the gasket grooves. <br /> <br />a. Special attention shall be given to the lining of fittings. <br /> <br />3. Lining shall be applied to bare metal. <br /> <br />4. Lining shall extend to the faces of flanges, to the end of spigots, or to the <br />shoulder of hubs, as the case may be. <br /> <br />N. Asphaltic coating shall be applied to the exterior of ductile iron pipe and fittings <br />intended for buried service and shall conform to AWWA/ANSI C151/ A21.51. <br /> <br />1. Ductile iron pipe and fittings intended for interior use and for use above <br />grade shall receive a prime coat compatible with the coating system <br />specified in Paints and Coatings - 09900. <br /> <br />2.03 POLYVINYLCHLORIDE (PVC) PIPE <br /> <br />A. PVC pipe shall conform to ASTM D1785 and shall be made from a 12454B <br />compound, which is a Type 1, Grade 1, plastic as defined by ASTM D1784. <br /> <br />1. Rerun or reclaimed materials will not be acceptable. <br /> <br />B. Pipe to be used for potable water applications shall comply with the National <br />Sanitation Foundation Standard No. 14 and shall have markings on the pipe to <br />indicate that it has been tested and is in compliance. <br /> <br />C. Wall Thickness shall be a minimum of Schedule 80, unless otherwise noted in <br />Schedule 15D. <br /> <br />D. Pipe joints shall be provided as specified in the pipe schedule. <br />1. Where required, socket type adapters and socket type flange adapters shall <br />be provided. <br />E. PVC pipe intended for buried service shall be socket weld joint. <br /> <br />F. Socket type joints shall be made up in accordance with ASTM D2855 with a <br />PVC solvent cement complying with ASTM D2564. <br /> <br />1. The cement shall have a minimum viscosity of 2000 cps. <br /> <br /> <br />City of Sunny Isles Beach <br />NE 174th Street Roadway Improvements <br />15105 - 7 Pipes and Tubes <br />14-1758 / 09-19-2014 <br />