GEO-Surfaces - Laserfiche WebLink

Home Browse Search

' GEOGREEN AND GEOFLO DESIGN AND BUILD INSTALLATION GUIDE SPECIFICATIONS 1. SCOPE OF WORK Geo-Surfaces will provide all labor, materials, equipment and tools necessary for the complete installation of a shock pad with a vertical-to-horizontal draining synthetic turf,in-filled with resilient materials. 1 The work shall include the following items: 1) Begin at existing grade and remove and dispose of unwanted materials to accommodate specified cross-section, slope ' and finished grades. This unwanted material shall be disposed of by the contractor. 2) Contour, slope, and compact remaining sub-base to specified grades. 3) Install compactable,crushed stone to reach finish grade. Compact and laser grade to a tolerance of'/."in 10'. 4) Install a concrete footer as a perimeter anchor with treated board nailer,to match finish grade of stone base. 5) Install trench(collector)drains and attach to the existing outflows as directed by the City of Sunny Isles Beach. 6) Install GeoFlo shock pad and dynamic drainage blanket over entire base and beyond, terminating over trench drains with ' 2 feet width of pervious GeoFlo. 7) Install a replicated grass, fiber will be a minimum 100 Micron, a maximum 2.0 mm width, 100% polyethylene fiber, measuring a maximum of 1.75 inches high, stitched in a maximum 3/8 inch gauge. ' 8) Install resilient infill system(Including1/4'ballast layer)consisting of a specifically formulated mixture of rubber. Infuse infill mixture into synthetic grass in multiple applications. 9) Install markings and colors as outlined in the agreed upon shop drawings. II. REPLICATED GRASS A. SPECIFICATIONS: The Gw Green replicated grass material and infill shall be in accordance with the following: I) The fiber will be a minimum 100 Micron, a maximum 2.0 mm width, non-abrasive, 100% polyethylene mono-filament and parallel fiber in alternating stitch lines, measuring a maximum of 1.75 inches high, stitched in a maximum 3/8 inch ' gauge. The tufted weight shall not be less than 80 ounces per square yard. The fiber shall be 100% polyethylene, (no polypropylene blend permitted), treated with UV inhibitor and shall be tufted at a yarn weight of 60 ounces per square yard. 2) The fiber tufts shall be fanned or unfolded prior to installation and will not exhibit rolling or spiraling. 3) The turf backing shall be a dual laver primary coated with a 20-ounce urethane secondary backing, tufted with a 100% polyethylene yam. ' 4) The replicated grass shall be delivered in 15 feet or 12 feet wide rolls. ' 5) Other markings ma" be permanently installed, in situ, at an additional cost clearly delineated under alternate cost options. 6) The infill material shall consist of a non-compacting specifically graded, granulated crumb rubber above a 'V.." ballast layer. These materials shall be as designated by GeoSurfaces and delivered to the job site in appropriate containers. 7) The GeoFlo shock pad and dynamic drainage blanket shall be delivered in 4 feet or 8 feet wide rolls. B. PHYSICAL PERFORMANCE CRITERIA: Global Synthetics EnvironmentaL LLC • 6326 Highland Road • Baton Rouge.LA 70808 • 225.907.4763• twwv.aeosurfaces-cOm 7 RFP#12-10-03 1