Laserfiche WebLink
APPROACH/METHODOLOGY 43 <br /> ®SYNTHETIC TURF: <br /> NOTE: Prior to the turf installation, the synthetic turf contractor shall submit a drawing of the overall field <br /> layout (showing all in situ lines, markings, etc.) to the owner for approval b the owner. Turf installation <br /> shall not begin until the owner's written approval of the field layout drawing has been turned over to the <br /> contractor. <br /> The artificial turf shall be installed directly over the finished stone base in rows that run completely across <br /> the field from sideline to sideline. Utilizing standard state-of-the-art seaming procedures, the entire side of <br /> each roll shall be attached to the side of the adjacent roll. Head seams shall not be allowed on the playing <br /> field area. When all of the rolls of the playing field surface have been installed, the rolls on the sideline <br /> areas shall be installed. The sideline rolls shall be at right angles to the rolls that are on the playing field. <br /> All turf seams shall be taped and glued, unless sewn seams are specified by the customer/owner. After <br /> all seams are completed, the perimeter of the turf shall be attached to the nailer boards using rustproof <br /> carpet staples. The staples shall be place on 6" centers. <br /> BASIC QUALITY STATISTICAL SUMMARY & GRADATION REPORT <br /> Trench Stone (Platinum & Traditional Systems <br /> Product: 057-#57 Stone <br /> Specification: #57 Stone Spec <br /> ® Sieve/Test Tests Average <br /> 100.00 Target Specification <br /> 1 1/2" (37.5mm) 263 100-100 <br /> 1" (25mm) 256 98.7 95-100 <br /> 3/4" (19mm) 256 83.8 <br /> 1/2" (12.5mm) 256 I 39.00 25-60 <br /> 3/8" (9.5mm) 256 16.4 <br /> #4 (4.75mm) 256 2.1 0-10 <br /> #8 (2.36mm) 256 1.0 0-5 <br /> PAN (Oum) 256 0.00 <br /> BASIC QUALITY STATISTICAL SUMMARY & GRADATION REPORT <br /> 1" Top Stone (on Platinum Trenches) <br /> 2" Top Stone (on Traditional Trenches & Field) <br /> Product: 008-#8 Stone (Clean, crushed 3/8" stone) <br /> Specification: #8 Stone Spec <br /> Sleve/Test Tests Average Target Specification <br /> 1 1/2" (37.5mm) I 303 100.00 100 100-100 <br /> 3/8" (9.5mm) 303 96.6 97 85-100 <br /> #4 (4.75mm) I 303 19.2 22 10-30 <br /> #8 (2.36mm) 303 2.7 3 0-10 <br /> #16 (1.18mm) 302 1.4 1.5 0-5 <br /> PAN (Oum) 303 0.00 <br /> Recreational Design & Construction, Inc. I RFP NO. 12-10-03 834 <br />