Reso 2018-2806 - Laserfiche WebLink

Home Browse Search

o� ]t 7L.,11`111 SYSTEMS The B1ueTOAD devices will be delivered and staged at an Econolite facility located in Miami-Dade County. The BIueTOAD Devices will be tagged and entered for asset tracking. Basis of Payment BIueTOAD devices will be-measured per each, and paid for upon proof of delivery of the BIueTOAD field devices to the Contractor facility. Task 6 Preventive Maintenance Description of Work Econolite will perform Preventive Maintenance for each traffic signal location. The work shall include the following activities: o Display Equipment Inspection • Visually inspect signal and pedestrian displays and verify all indications are operational, note condition and alignment of all heads, note any deficiencies o Detector Verification • Verify proper operation of vehicle detectors, note any faults and reset • Inspect condition of all loops and lead-ins; note sealant failures by street approach, lane and phase • Verify proper operation of pedestrian pushbuttons on all approaches, note failures or other issues • Check push button lamps, audio operation and direction, if applicable o Intersection Infrastructure Inspection • Check condition of pull-boxes; note size and number of any broken or missing lids, crushed boxes and buried boxes • Perform ground-level visual inspection of metal poles for damage,rust, cracked welds, grounding & foundation damage • Perform ground-level visual inspection of hand hole covers on steel poles; secure if necessary and note if missing • Perform ground-level visual inspection of conduit risers; note any repairs needed o Cabinet Inspection • Inspect foundation and exterior for damage and vandalism • Check door gaskets, anchor bolts,base extension bolts; reseal base if water is present • Check for signal plans; verify signal heads are per plan; note any discrepancies • Check/test interior cabinet lamps, fan and thermostat; replace any that are not working properly and note replacements • Check physical condition of meter/service disconnect, line filter and surge arrestor • Ensure all load switches and flashers have a tight and secure fit into the socket • Check for and note any burned, pitted, corroded or discolored contacts and terminals • Visually inspect condition of all relays and note if burned or full of ants; replace if necessary • Ensure all terminal connections and harnesses have a tight and secure fit; check for frayed writing and note if any are found • Visually check condition of all loading resistors 1250 N.Tustin Avenue 0 Anaheim,California 92807 0 Ph:(714)238-9277 0 Fax:(714)630-1973 econolite.com 0 feedback.econolite.com