Laserfiche WebLink
1 <br /> 8. Written permission of any separate contractor whose work will be <br /> affected. <br /> C.C. Submit written notice to the Engineer designating the date and the time work will <br /> be uncovered. <br /> PART 2 - PRODUCTS <br /> 1 2.01 MATERIALS <br /> A. Comply with specifications and standards for each specific project involved. <br /> 1 PART 3 - EXECUTION <br /> 1 3.01 INSPECTION <br /> A. Inspect existing conditions of Project, including elements subject to damage or to <br /> movement during cutting or patching. <br /> 1 B. After uncovering work, inspect conditions affecting installation of Products, or <br /> performance of work. <br /> 1 C. Report unsatisfactory or questionable conditions to the Engineer in writing; do not <br /> proceed with work until the Engineer has provided further instructions. <br /> 1 3.02 PREPARATION <br /> 1 A. Provide adequate temporary support as necessary to assure structural value or <br /> integrity of affected portion of Work. <br /> B. Provide devices and methods to protect other portions of Project from damage. <br /> 1 C. Provide protection from elements for that portion of the project that may be <br /> exposed by cutting and patching work, and maintain excavations free from water. <br /> 1 3.03 PERFORMANCE <br /> 1 A. Execute cutting and demolition by methods that will prevent damage to other <br /> work, and will provide proper surfaces to receive installation of repairs. <br /> B. Execute excavating and backfilling by methods that will prevent settlement or <br /> damage to other work. <br /> 1 C. Employ original Installer or Fabricator to perform cutting and patching for: <br /> 1. Weather-exposed or moisture-resistant surfaces. <br /> 2. Sight-exposed finished surfaces. <br /> 1 D. Execute fitting and adjustment of products to provide a finished installation to <br /> comply with specified products, functions, tolerances and finishes. <br /> 1 <br /> 05/08 01045-2 05-4893 <br />