Laserfiche WebLink
1 <br /> SECTION 02580 <br /> PAVEMENT MARKINGS AND SIGNING <br /> PART 1 - GENERAL <br /> 1.01 SCOPE <br /> A. The Contractor shall supply all labor, equipment, materials and incidentals <br /> necessary to install pavement markings and signing in accordance with the plans <br /> and the following specifications. <br /> 1.02 REFERENCED SPECIFICATIONS, CODES AND STANDARDS <br /> 1 A. Manual of Uniform Control Devices, latest edition <br /> B. FDOT Design Standards, 1992 edition (as applicable) <br /> 1 C. FDOT Standard Specifications for Road and Bridge Construction, 1991 edition <br /> (as applicable) <br /> PART 2 - PRODUCTS <br /> 2.01 MATERIALS <br /> A. Thermoplastic traffic stripes and markings shall meet the requirements of <br /> PASHTO M249-79 (1986) and exceptions as indicated in the "FDOT Standard <br /> Specifications for Road and Bridge Construction", 1991 edition. <br /> B. Signs - General: <br /> 1. The design and construction of traffic signs shall be in accordance with <br /> the following standards: <br /> + Manual of Uniform Control Devices, Latest edition <br /> + Florida DOT Standard Specifications <br /> + Florida DOT Roadway and Traffic Design Standards <br /> t 2. Shop drawings and quantities for paint overhead sign structures, special <br /> designs for ground sign structures, shall be submitted to the Engineer for <br /> approval. <br /> PART 3 - EXECUTION <br /> A. Parking stalls shall be marked in accordance with the typical pattern indicated on <br /> the criteria drawings. Stall width and depth, and drive widths indicated are <br /> minimum and must not be reduced. <br /> B. Directional arrows shall be marked on pavement in location and of size indicated <br /> on drawings. <br /> 1 <br /> 05108 02580-1 05-4893 <br />