Laserfiche WebLink
Page 8 <br />MOUTNING THE BOX TO WALL STUDS <br />1. Set the box between the wall studs through the drywall (if applicable). (FIGURE E) <br />2. Feed any cabling through their corresponding knockouts on the box. <br />3. Use a 1/4” bit to drill pilot holes through the mounting holes from the inside of the box, if desired. <br />4. Mount the box to the studs using (4x) #10 x 1 1/2” (minumum size) wood screws and (4x) #10 <br /> washers (screws and washers not provided) through the mounting holes from the inside of the box. <br /> (FIGURE F) <br />FIGURE F <br />FIGURE E <br />Mounting <br />Holes