Laserfiche WebLink
Gateway Park Center PERKINS+WILL <br /> 810495.000 <br /> 12/06/18 <br /> <br /> <br />DEMOUNTABLE PARTITIONS <br />10 22 19 - 5 <br /> <br /> <br />2.4 FRAMELESS SLIDING, HINGED GLASS DOOR & GLASS WALL <br />A. Track: Extruded aluminum, single track profile with flexibility of allowing the use of <br />3/8”, 1/2” or 5/8” glass, allow the glass to be center mounted, offset mounted to <br />inside or outside, or the use as a double pane system. System to be modular and <br />reconfigurable with regards to changing out glass thickness, plane of installation, and <br />being able to retrofit to double pane system for future applications. <br />1. Ceiling Track: <br />a. Size: 3 inches wide x 1-9/16 inches high x full length. <br />b. Attached to suspended ceiling via caddy clips. <br />2. Floor Track: <br />a. Size: 3 inches wide x 1-9/16 inches high x full length. <br />b. Carpet grippers integral to aluminum extrusion. <br />c. Leveling tray included. <br />3. Finish: Bronze Anodized. <br />B. Glass Walls: <br />1. Clear tempered glass conforming to ASTM C1048. <br />2. Thickness: 12 mm. <br />3. Vertical Edges: Counter-profile chamfer with double-sided polish edges. <br />4. Seams: Butt joints. <br />5. Vertical “Slim Trim” 3/8” or 1/2”, profile to fit counter- profile on glass for in-line <br />elevation run, finish to match glass or aluminum. <br />6. Top captured by aluminum channel set into Ceiling Track. <br />7. Bottom captured by aluminum channel integral to Base Track assembly. <br />8. Aluminum Finish: Bronze Anodized. <br />C. Frameless Glass Sliding Doors/ Telescoping Doors: <br />1. Clear tempered glass conforming to ASTM C1048. <br />a. Thickness: 12mm. <br />b. Edges: Chamfer Polished. <br />c. Door: Panel to slide within the floor track. <br />2. Hardware: To be coordinated with selected manufacturer to provide the <br />following functions: <br />a. Double roller ball-bearing running gears. <br />b. Adjustable clamp shoes with Full Width Fascia. <br />c. Acoustic seals. <br />d. Ladder pull: Model, length, locking/non-locking as required. <br />e. Finish: Brushed stainless steel. <br />D. Frameless Glass Hinge Door: <br />1. Clear tempered glass conforming to ASTM C1048.