Golden Shores Utility Underground Specs

Home Browse Search

CTA Project No. 19-0035-001-01 01600-3 Golden Shores Street Lighting October 12, 2020 SIB Bid No. 20-09-01 CONTRACTOR shall maintain a log of inspections and shall make said log available to the ENGINEER on request. B. The CONTRACTOR shall verify that storage facilities comply with supplier's product storage requirements. C. The CONTRACTOR shall verify that supplier/manufacturer required environmental conditions are maintained continually. D. The CONTRACTOR shall verify that surfaces of products exposed to the elements are not adversely affected and that any weathering of finishes is accep table under requirements of Contract Documents. 1.09 MAINTENANCE OF EQUIPMENT STORAGE A. For mechanical and electrical equipment in long -term storage, the CONTRACTOR shall provide a copy of the supplier's service instructions to accompany each item, with n otice on enclosed instruction shown on exterior of package. B. Equipment shall be serviced on a regularly scheduled basis, and a log of services shall be maintained and submitted as a record document to the ENGINEER. 1.10 LUBRICANTS A. During testing and prior to acceptance, the CONTRACTOR shall furnish all lubricants necessary for the proper lubrication of all equipment furnished under this Contract. 1.11 SPECIAL TOOLS A. For each type of equipment furnished by him, the CONTRACTOR shall provide a complete set of all special tools (including calibration and test equipment) which may be necessary for the adjustment, operation, maintenance and disassembly of such equipment. B. Special tools shall be delivered at the same time as the equipment to which they per tain. The CONTRACTOR shall properly store and safeguard such special tools until completion of the Work, at which time they shall be delivered to the CITY. 1.12 PROTECTION AGAINST ELECTROLYSIS A. Where dissimilar metals are used in conjunction with each other, suitable insulation shall be provided between adjoining surfaces so as to eliminate direct contact and any resultant electrolysis. The insulation shall be bituminous impregnated felt, heavy bituminous coatings, nonmetallic separators or washers, or ot her acceptable materials. 1.13 FASTENERS A. All necessary bolts, anchor bolts, nuts, washers, plates and bolt sleeves shall be furnished by the CONTRACTOR in accordance herewith. Bolts shall have suitable washers and, where so required, their nuts shall be hexagonal. B. All bolts, anchor bolts, nuts, washers, plates, and bolt sleeves shall be Type 316 stainless steel unless otherwise specifically indicated or specified. C. Unless otherwise specified, stud, tap, and machine bolts shall be of the best quality refined bar iron. Hexagonal nuts of the same quality of metal as the bolts shall be used.