Golden Shores Utility Underground Specs

Home Browse Search

CTA Project No. 19-0035-001-01 02780-5 Golden Shores Street Lighting October 12, 2020 SIB Bid No. 20-09-01 D. Pavers: 1. The pavers shall be laid in the approved pattern as noted or shown on the plans and approved sample panels. 2. Lay the pavers in the desired pattern with tight joints. For maximum inter lock, joints between pavers shall not exceed 1/8". 3. Use string lines to hold all patterns true. 4. The gaps at the edge of the paver surface shall be filled with standard edge stone or with stones cut to fit. Cutting shall be accomplished to leave a cle an edge to the traffic surface using a masonry saw. Cuts which result in a paver less than 1/3 of original dimension should be avoided. 5. Set pavers one-fourth inch higher than surrounding pavements or grade. 6. Vibrate the pavers into the sand laying co urse using a vibrator capable of 3,000 to 5,000 pounds compaction force with the surface clean and joints open. 7. After vibration, the clean sand joint mixture shall be spread over the paver surface, and vibrated into joints with additional vibrator passe s and brushing so as to completely fill joints. 3.04 CLEANING A. Immediately remove all spots, smears, stains, residues, adhesives, etc., from the Work of this Section and/or upon adjacent areas or surfaces which result from the Work. Use cleaners as manufactured by Paver Systems or approved equal for cleaning the pavers. B. Upon the completion of the work dispose of, away from the Site, all debris, trash, containers, residue, remnant and scraps which result from the Work. C. Remove sample panels at the completion of the work or when directed by the LANDSCAPE ARCHITECT. 3.05 PROTECTION A. After installation and until Owner acceptance, protect the pavers from damage. B. Remove damaged units and replace with new, undamaged units. 3.06 GUARANTEE A. Guarantee pavers and installation for twelve months after final payment. END OF SECTION 02780