BORETECH - Laserfiche WebLink

Home Browse Search

Bore Tech Utilities & Maintenance • Town Center Park • Pier Park • Gateway Park Garage Fiber -Optic Cable We will be installing three size fibers per project design: 1. 12ct single mode dielectric fiber 2. 24ct single mode dielectric fiber 3. 144ct single mode dielectric fiber 4. 288ct single mode dielectric fiber RFP 22-04-01 All cable, unless specifically called out, for shall be single -mode cable, rated for the environment in which it is installed. Installations shall be Corning OSP rated dielectric. All cables shall be loose tube. Coil a minimum of 50 feet of cable at each HH for a dead- end fiber cable Coil a min of 100 feet in all HH's where no dead-end fiber cable will be terminated All fibers will be tagged and labeled at each splice location, fiber termination panel and building entrance. Tags shall read cable size, count and origin. All fibers in the cables shall be usable fibers and shall be free of surface imperfections and occlusions, to meet or exceed all the optical, mechanical, and environmental requirements contained in this specification. All cables shall be free of material or manufacturing defects and dimensional non-uniformity. Each fiber optic outside plant cable for this project shall be all -dielectric, dry water - blocking material, duct type, with loose buffer tubes, and shall conform to these special conditions. The cable shall be qualified as compliant with Chapter XVII, of Title 7, Part 1755.900 of the Code of Federal Regulations, "REA Specification for Filled Fiber Optic Cables." The cable shall be tested in accordance with TIA/EIA-455-3A (FOTP-3), "Procedure to Measure Temperature Cycling Effects on Optical Fiber, Optical Cable, and Other Passive Fiber -Optic Components." The average change in attenuation at extreme operational temperatures (-40 C to +70 C) will not exceed 0.05 dB/km at 1550 nm. The magnitude of the maximum attenuation change of each individual fiber will not be greater than 0.15 dB/km at 1550 nm. This figure includes an allowance of up to 0.05 dB/km for measurement repeatability. We will be placing approx. 33,294' of fiber optic cable including slack in existing conduit and in newly installed conduit of which 2,000' of fiber cable and slack will be pulled through buildings. Of the fiber placed approx. 7,814' of 12ct will be placed, approx. 22,139' of 144ct fiber will be placed and approx. 3,341' of 288ct fiber will be placed l:]