Laserfiche WebLink
THE CITY OF SUNNY ISLES BEACH <br />PROJECT NO. 21-1011 <br />BUILDING DEPARTMENT RELOCATION TO ANNEX <br /> <br />Project No. 21-1011 November 2024 083453-2 <br /> <br />standard limited warranty with closeout documents. <br />PART 2 - PRODUCTS <br /> <br />2.1 MANUFACTURED UNITS <br /> <br />A. Basis of Design: <br /> <br />1. Subject to compliance with requirements, provide products by the following: <br /> <br />a. Total Security Solutions, Inc., 935 Garden Lane, Fowlerville, MI 48836, <br />866 734-6277. Attn: Sales Department, sales@tssbulletproof.com. Web: <br />www.tssbulletproof.com. <br /> <br />2. Subject to compliance with requirements, manufacturers of products of equivalent <br />design may be acceptable if approved in accordance with <br />[Section 01 25 00 Substitution Procedures]. <br /> <br />B. Design Performance: <br /> <br />1. Through the design, manufacturing techniques and material application the TSS <br />Bullet Resistant All Glass Door and Frame Assembly shall be constructed of a single <br />piece of Low Spall Glass Clad Polycarbonate to meet UL Standard 752 Level 3 <br />rating. <br /> <br />2. Door assembly to have no exposed fasteners. <br /> <br />3. Joint connections to have concealed clips to provide rigid assembly when installed. <br /> <br />4. Assembly shall include: <br /> <br />a. Header tube, top shoe, bottom shoe and pivot hinges. <br />b. Closer style to be determined. <br /> <br />5. All joints and connections shall be tight, providing hairline points and true <br />alignment of adjacent members. <br /> <br />6. Door assembly swing: [right hand] [eft hand] [reverse swing]. <br /> <br />C. Door and Frame Assembly Dimensions: As indicated on the Drawings. <br /> <br />D. Door and Frame Performance: <br /> <br />1. Standard door and frame assembly shall manufacture to defeat ballistic assaults <br />from 9mm medium power through.44 magnum superpower small arms handgun <br />as tested with UL Standard 752 at Underwriters Laboratories. <br /> <br />2. Glazing: LP-1250 Polycarbonate/Acrylic Laminate, 1-1/4” thick, 7.7lbs/sf to comply <br />with UL 752, Level [1] [2] [3] protection. <br /> <br />E. Door Frame Construction: <br />