Laserfiche WebLink
THE CITY OF SUNNY ISLES BEACH <br />PROJECT NO. 21-1011 <br />BUILDING DEPARTMENT RELOCATION TO ANNEX <br /> <br />Project No. 21-1011 November 2024 042200 Concrete Unit Masonry-5 <br />A. Construct lintels using grout fill and reinforcing specified. Place reinforcing bars as shown on <br />the drawings.] <br /> <br />B. Install reinforced unit masonry lintels over openings. Construct lintels using grout fill and <br />reinforcing. Maintain at least 8-inch bearing on each side of opening. <br /> <br />C. Use reinforcing bars of one-piece lengths only. <br /> <br />D. Place and consolidate grout fill without disturbing reinforcing. <br /> <br />E. Allow lintels constructed in place to reach strength before removing temporary supports. <br />3.9 GROUTED COMPONENTS <br />A. Reinforce masonry units as shown on the drawings. <br />B. Lap splices at least 24 bar diameters. <br />C. Place and consolidate grout fill without disturbing reinforcing. <br />D. Solid grout concrete masonry units in accordance with California Building Code section <br />2104A.6.1.2.2. <br /> <br />3.10 CONTROL JOINTS <br />A. Do not continue horizontal joint reinforcing across control joints. <br />B. Form control joint by use of sheet building paper bond breaker one side fitted to hollow <br />contour of block unit end. Fill created core with grout fill. Rake joint at exposed faces for <br />rod and sealant. <br />C. Install resilient control joint in continuous lengths. Heat solvent weld butt and corner joints <br />in accordance with manufacturer's instructions. <br />D. Size joint in accordance with Division 07 Section "Joint Sealants" for sealant performance. <br />3.11 BUILT-IN WORK <br />A. As work progresses, build-in [metal door frames,] [fabricated metal frames,] [window <br />frames,] [wood nailing strips,] [anchor bolts,] [plates,] and other items to be built in the <br />work supplied by other sections. <br />B. Build-in items plumb and level. <br />C. C. Bed anchors of metal door [and glazed] frames in mortar joints. Fill frame voids solid <br />with mortar. [Fill masonry cores with grout at least [12 inches (300 mm)] <Insert option <br />Here> from framed openings.] <br />D. Do not build-in organic materials subject to deterioration. <br />3.12 CUTTING AND FITTING